Reply to thread

Message: <blockquote data-quote="Django.edwards" data-source="post: 767402" data-attributes="member: 98942">Hi mm,1. so I did a first tuningtest. What is it for a frequency 11432000? Is this a hotbird tp? When I look at de.kingsofsat.net I can't find any channel on this transponder. Anywhere, I did some test with modulation none,qpsk,qpsk2 and 16apsk wich is mentionned at kingsofsat. I got always nothing found. Maybee we should use an other frequency?I used before the driver version 2.1.1130.0, same result. Then I updated to 2.2.310.0 which is the latest. Same result.At the moment I can not test without ci module installed because this installation is situated in another town, I am connected over Teamviewer to do these tests. But as soon as I can get there I will check without ci or without cam connected an put the results.I installed the Diseqc switch last week, so before the lnb's were connected directly, I did not remarked any difference in performance, and I had always these scanning problems. This was also the reason to do some manual scans, which worked then.2. Trust me, I switched everything, the cables, the cards, the cams, the ci modules. No difference. With only 1 card in the system I think that I never had problems with the cam.What I remarked is, that it is always the card wich is in PCI slot 1 which makes problems. So first I thinked of mainboard problems. For this reason I checked with GlobeTV 2011 from KNC. But with this software the ci modules are always recognized. I never had problems with this soft. So thats the reason why I think this could be Mepo related.When the 1. card makes these cam problems, the only way to resolv this, is to stop the tvservice and to restart it. Then the problems are away, until the nextr occurence.3. + 4. as I said, this is not really urgent. For me it is annoying, but I can life wis such little problems.Anything else that I could do?</blockquote>

Verification