Install Terratec cinergy hybrid T USB XS (1 Viewer)

[johnny-b]

MediaPortal Version: 0.2.2.0
MediaPortal Skin: Blue Two
Windows Version: WinXP Home SP2
CPU Type: Intel P4, 3GHz
HDD: 55 GB
Memory: 512MB
Motherboard: Dell Inspiron 5150
Video Card: NVidia GeForce FX Go5200
Video Card Driver: 4.5.8.6
1. TV Card: Terratec Cinegry Hybrid T USB XS
1. TV Card Type: DVB-T and analog
1. TV Card Driver: 4.6.1115.0
MPEG2 Video Codec: NVidia Video Decoder
MPEG2 Audio Codec: NVidia Audia Decoder

Hello,
I have an MP up and running - so far without TV tuner. Now I installed my new USB TV tuner (cinergy hybrid T XS): It works fine with the terratec TV software. However, when I start the setup and want to add a capture card, the tuner is not detected.
There is a section in the CaptureCardDefinitions.xml which contains my tuner. However, the PID in the xml (0042) differs from the PID mentioned with the driver (005e). So I changed the value in the xml file and tried again - I still doesn't work.

Do I have do prepare anything else before using the "add capture card" in the setup?
Can anybody give me a hint what I could check next?

Thanks

 

[amartini]

I've the same tvcard and the same problem! Also I change the pid to "005e" but it's working!

If you want you can see my thread:

https://forum.team-mediaportal.com/cinergy_hybrid_t_usb_xs_not_working-t19921.html

Bye,

Antonio Martini

MediaPortal Version: 0.2.2.0
MediaPortal Skin: Blue Two
Windows Version: WinXP Home SP2
CPU Type: Intel P4, 3GHz
HDD: 55 GB
Memory: 512MB
Motherboard: Dell Inspiron 5150
Video Card: NVidia GeForce FX Go5200
Video Card Driver: 4.5.8.6
1. TV Card: Terratec Cinegry Hybrid T USB XS
1. TV Card Type: DVB-T and analog
1. TV Card Driver: 4.6.1115.0
MPEG2 Video Codec: NVidia Video Decoder
MPEG2 Audio Codec: NVidia Audia Decoder

Hello,
I have an MP up and running - so far without TV tuner. Now I installed my new USB TV tuner (cinergy hybrid T XS): It works fine with the terratec TV software. However, when I start the setup and want to add a capture card, the tuner is not detected.
There is a section in the CaptureCardDefinitions.xml which contains my tuner. However, the PID in the xml (0042) differs from the PID mentioned with the driver (005e). So I changed the value in the xml file and tried again - I still doesn't work.

Do I have do prepare anything else before using the "add capture card" in the setup?
Can anybody give me a hint what I could check next?

Thanks

 

[HankMcSpank]

Same problem here too....MP sees that there's a Technotend S2-3200 installed, but I also have two Terratec Cinergy T USB XSs in my HTPC...so when I go to manually add them, MP reports "no capture cards were found, you will not be able to configure a capture card"

Checked the CaptureCardDefinitions.xml & the listed info for my card seems to match completely with the info under the driver details tab of the Terratec driver. (pid 0043)

My two Terratec Cinergy t USB XS Tuners work just fine in MCE & the supplied Terratec s/w....so why not MP?

 

[Loeckchen]

Any progress yet? I'm having the same problem here. Tried the Graphedit solution, but it still doesn't recognize the card.

 

[Patrizio]

Same problem...I used GraphEdit and the procedure in this link:
http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list

Now it seems to be ok for the digital TV (I'm testing).

My CaptureCardDefinitions.xml
(verify devid, pin number and name in GraphEdit).

<capturecard commercialname="Terratec Cinergy Hybrid T USB XS" capturename="Cinergy Hybrid T USB XS Digital Capture" devid="vid_0ccd&amp;pid_005e">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"/>
<tv>
<interface cat="capture" video="3" audio="4" mpeg2="1" sectionsandtables="2"/>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"/>
<filter cat="tunerdevice" name="Cinergy Hybrid T USB XS Digital Tuner" checkdevice="true"/>
<filter cat="capture" name="Cinergy Hybrid T USB XS Digital Capture" checkdevice="true"/>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"/>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
</connections>
</tv>
</capturecard>


Patrizio

 

[itaylor]

Thanks patrizio! I did a cut and paste of your XML and MP sees my cinergy hybrid T USB XS.
I now have another problem - MP seems to freeze when I choose full screen.
Ian