Reply to thread

Message

<blockquote data-quote="clarkebelt" data-source="post: 1090276" data-attributes="member: 148422"><a href="https://forum.team-mediaportal.com/threads/tbs-ci-cam-support-and-other-improvements.103276/page-51#post-1051247" target="_blank">https://forum.team-mediaportal.com/threads/tbs-ci-cam-support-and-other-improvements.103276/page-51#post-1051247</a>These patches worked great - I now have both DiSEqC switches connected and the card is controlling them.&nbsp; Thanks very much!Unfortunately this problem still exists so I have sent you log files.&nbsp; If you look right at the end (starting around 1:38 AM&nbsp; on July 10) you will see several attempts to tune Ku channels, from both XBMC and MediaPortal, all of which were unsuccessful.This also worked great, but now I am experiencing a different issue (maybe).&nbsp; If you look in the log files I sent you, at 23:59 (11:59 PM) on July 9 I had scheduled a one hour long recording to start, and that worked.&nbsp; Then at 00:29 (12:29 AM) on July 10, one half hour later, I scheduled a half hour recording which came from the same satellite but a different transponder.&nbsp; For whatever reason, the second recording started, but only recorded about 10 to 15 seconds of program, whereupon the file abruptly ended.&nbsp; Yet MediaPortal seemed to think it was still recording that channel for the entire duration, as evidenced by a message displayed in XBMC that indicated the recording was still in progress.&nbsp; I just wonder if you can see any reason that might have happened in the log file.&nbsp; I'm not discounting the idea that this might be a tuner issue or some other problem, but I was hoping perhaps you might see something that would give you some indication of what happened to cause that recording to die after such a short time.Anyway, if you can determine anything about what is causing either or both of these issues and how to fix them, I'd be most appreciative.&nbsp; And thank you again for the fixes above!</blockquote>

[QUOTE="clarkebelt, post: 1090276, member: 148422"] [URL='https://forum.team-mediaportal.com/threads/tbs-ci-cam-support-and-other-improvements.103276/page-51#post-1051247'][/URL] These patches worked great - I now have both DiSEqC switches connected and the card is controlling them. Thanks [I]very[/I] much! Unfortunately this problem still exists so I have sent you log files. If you look right at the end (starting around 1:38 AM on July 10) you will see several attempts to tune Ku channels, from both XBMC and MediaPortal, all of which were unsuccessful. This also worked great, but now I am experiencing a different issue (maybe). If you look in the log files I sent you, at 23:59 (11:59 PM) on July 9 I had scheduled a one hour long recording to start, and that worked. Then at 00:29 (12:29 AM) on July 10, one half hour later, I scheduled a half hour recording which came from the same satellite but a different transponder. For whatever reason, the second recording started, but only recorded about 10 to 15 seconds of program, whereupon the file abruptly ended. Yet MediaPortal seemed to think it was still recording that channel for the entire duration, as evidenced by a message displayed in XBMC that indicated the recording was still in progress. I just wonder if you can see any reason that might have happened in the log file. I'm not discounting the idea that this might be a tuner issue or some other problem, but I was hoping perhaps you might see something that would give you some indication of what happened to cause that recording to die after such a short time. Anyway, if you can determine anything about what is causing either or both of these issues and how to fix them, I'd be most appreciative. And thank you again for the fixes above! [/QUOTE]

Verification