ISDN Caller-ID (5 Viewers)

[djsky]

Hi mPOD,
thanks for your fast reply, I'll check that later. My girlfirend won't like it if I'd do it now.... :roll:

I though your changes were already inlcuded to the prerelease.

 

[mPod]

Hi mPOD,
thanks for your fast reply, I'll check that later. My girlfirend won't like it if I'd do it now.... :roll:

I though your changes were already inlcuded to the prerelease.

They were (or at least should have been), but by an accident our setup package contained a too old file. I wasn't very happy about it either, but... Bad luck, next time better... As it is only a prerelease, and it did not really affect other parts, we decided to leave it as it is... Buggy. :wink:

 

[Ted]

Hello,

just a short question. I have 0.1.3.0 running, but I don't find the plugin.
I found no info, that it is not in the release, isn't it?

Will it bei in the 0.2.0.0 etc??

Cheers
Ted

 

[mPod]

Hello,

just a short question. I have 0.1.3.0 running, but I don't find the plugin.
I found no info, that it is not in the release, isn't it?

Will it bei in the 0.2.0.0 etc??

Cheers
Ted

It is. Go to configuration.exe, Plugins. There you'll find "ISDN Caller-ID". :wink:

 

[Ted]

It is. Go to configuration.exe, Plugins. There you'll find "ISDN Caller-ID".

hmmmm......not in my configuration (pressing F2 in MP). I only find YAC and this doesn't work with my ISDN.....

Does the ISDN Caller-ID work with Remote-CAPI?

THanks
Ted

 

[mPod]

Does the ISDN Caller-ID work with Remote-CAPI?

It has been reported as working, yes.

No idea why it does not appear in your config. Maybe you should try a 0.2 version of MP. I'm pretty sure we have put it into 0.1.3... But that's a bit long ago, so I might be wrong. Don't shoot me for that... :wink:

 

[nordlicht_68]

ISDN with no CallerID lets´t crashes MP

Hi,

i´m a little bit wondered, that i don´t found the same Problem in any thread.

My MP (0.2.2. with snapshot from 2007-01-04) crashed when i get a call without a ISDN Caller ID in germany.

With a ID it´s run very OK.

First i don´t have a outlook, later i have outllok installes, no change.

i havbe a Fritz ISDN PCI card with the newest Capi driver, the fritz software an all other isdn monitoring tool are working fine.

first a log with a caller id (OK, but no adress entry for this number in outlook!):
[Info.][CAPI Monitoring]: ISDN: CAPI command: 0x02 / 0x82
2007-01-09 23:17:36.578125 [Info.][CAPI Monitoring]: ISDN: Buffer: (7)(193)304196(12)(33)(129)4342304196(0)(0)(3)(128)(144)(163)(0)(2)(145)(129)
2007-01-09 23:17:36.578125 [Info.][CAPI Monitoring]: ISDN: stripped 0 leading zeros
2007-01-09 23:17:36.578125 [Info.][CAPI Monitoring]: ISDN: CalledID: xxxxxx
2007-01-09 23:17:36.578125 [Info.][CAPI Monitoring]: ISDN: CallerID: 434xxxxxxx
2007-01-09 23:17:36.593750 [Info.][CAPI Monitoring]: Outlook exception: Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80040154.
2007-01-09 23:17:36.593750 [Info.][CAPI Monitoring]: ISDN: Incoming call from (Preetz, Germany / +49 (4342) 304196)
2007-01-09 23:17:36.609375 [Info.][CAPI Monitoring]: Control has invalid animation type
2007-01-09 23:17:36.625000 [Info.][CAPI Monitoring]: WindowManager:route MediaPortal.GUI.Home.GUIHome:0->MediaPortal.Dialogs.GUIDialogNotify:2016
2007-01-09 23:17:36.796875 [Info.][CAPI Monitoring]: window:MediaPortal.Dialogs.GUIDialogNotify init
2007-01-09 23:17:37.093750 [Info.][CAPI Monitoring]: Main: DX9 re-entrant
2007-01-09 23:17:38.609375 [Info.][CAPI Monitoring]: Main: DX9 re-entrant
2007-01-09 23:17:40.375000 [Info.][CAPI Monitoring]: Main: DX9 re-entrant
2007-01-09 23:17:42.140625 [Info.][CAPI Monitoring]: Main: DX9 re-entrant
2007-01-09 23:17:42.812500 [Info.][CAPI Monitoring]: window:MediaPortal.Dialogs.GUIDialogNotify deinit
2007-01-09 23:17:42.828125 [Info.][CAPI Monitoring]: texturemanager:CleanupThumbs()
2007-01-09 23:17:42.828125 [Info.][CAPI Monitoring]: WindowManager:unroute to MediaPortal.Dialogs.GUIDialogNotify:2016->MediaPortal.GUI.Home.GUIHome:0
2007-01-09 23:17:46.593750 [Info.][CAPI Monitoring]: ISDN: CAPI command: 0x04 / 0x82
2007-01-09 23:17:48.578125 [Info.][MPMain]: Main: Exit requested

now, a log with a crash because no caller id:

007-01-09 20:44:19.875000 [Info.][CAPI Monitoring]: ISDN: CAPI command: 0x04 / 0x82
2007-01-09 20:44:35.937500 [Info.][CAPI Monitoring]: ISDN: CAPI command: 0x02 / 0x82
2007-01-09 20:44:36.078125 [Info.][CAPI Monitoring]: ISDN: Buffer: (7)(193)xxxxxx(2)(0)(163)(0)(0)(3)(128)(144)(163)(0)(2)(145)(129)
2007-01-09 20:44:36.171875 [Info.][CAPI Monitoring]: MediaPortal: Unhandled exception occured
2007-01-09 20:44:36.390625 [Info.][CAPI Monitoring]: Exception ystem.NullReferenceException: Object reference not set to an instance of an object.
at ProcessPlugins.CallerId.ISDNWatch.WatchThread()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2007-01-09 20:44:36.390625 [Info.][CAPI Monitoring]: Exception :Object reference not set to an instance of an object.
2007-01-09 20:44:36.406250 [Info.][CAPI Monitoring]: site :Void WatchThread()
2007-01-09 20:44:36.421875 [Info.][CAPI Monitoring]: source rocessPlugins
2007-01-09 20:44:36.421875 [Info.][CAPI Monitoring]: stacktrace: at ProcessPlugins.CallerId.ISDNWatch.WatchThread()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2007-01-09 20:44:37.031250 [Info.][CAPI Monitoring]: MediaPortal: stop...


and a Exception.log

ExceptionType: System.NullReferenceException
Message: Object reference not set to an instance of an object.
Source: ProcessPlugins

Stack trace:
at ProcessPlugins.CallerId.ISDNWatch.WatchThread()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()

have anybody a idea?
thanks
STEPHAN

 

[nordlicht_68]

sorry,

i have the next question in same time:

mPod: can you reload the screenshots from your first post in this thread?

i have problems to configure the outlook adressbook:

- You mean really outlook, not outlook express?

- i have installed the MP on drive D:\programme\teamMed..... and office with outlook on drive C:\Prpgramme\Microsoft... is this ok?

- i configure a adress under "kontakte" (german outlook 97 .. musst i use a newer version??) my name under "voller name" and "Adress" an my tel number: +49 (xxxx) (without an with a "0" for test) under "privat" and my correct number 123456.

But the messages window in MP only said "eingehender Anruf von my area, germany an the absolkut same number as in outlook kontakte, but no name or anything else.
here ist the log:
1-09 23:17:36.593750 [Info.][CAPI Monitoring]: Outlook exception: Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80040154.

whats wrong?

thank you once more!

 

[mPod]

Could be that Outlook 97 is too old, it has been tested with Outlook 2003. Sorry, I don't have the pictures anymore, but the description in the first post should be pretty straight forward even without pictures.

 

[nordlicht_68]

good morning mpod,

thanks, i tested with office 2003 today or tomorrow!

but i don´t think the problem with emty caller numbers is resolved with the newer outlook.

Have you a idea (see the post bevore with logs). We can email in german.

Why did MP crash by incomming call with no isdn number?

greeting to berlin!

Stephan