Reply to thread

Message

<blockquote data-quote="wupperi" data-source="post: 855881" data-attributes="member: 54209">Hello Forum,&nbsp;I just removed my old Digital Everywhere S2 tuners and moved to DD. I am using the following tuner setup:&nbsp;<ul>
<li data-xf-list-type="ul">Digital Devices Cine S2 V6</li>
<li data-xf-list-type="ul">Two single slot CI modules attached to the Cine CT, each to one port on the Cine CT -&gt; it is NOT the new dual CI card</li>
</ul>In DVBCineConfig tool I have assigned the CAM module in slot 1 to tuner 1, and the slot 2 CAM is assigned to tuner 2. So in theory for MePo it should look like two tuner with one CI and CAM attached to it.&nbsp;In MePo I configured each tuner to have a CAM configured with capabilities of descrambling one channel, so no MTD configured. Card settings are set to &quot;Stop Card&quot; and no preloading.&nbsp;&nbsp;When I try to watch FTA HD or SD channels they work perfectly fine on both tuners. However when I want to watch encrypted channels I only get the tuner 1 to work. Whenever I try to tune an unencrypted channel on tuner 2 I get a &quot;Channel is scrambled&quot; error.I know that my smartcards work in the respective CAMs since they did work with my old Digital Everywhere setup, so I must be doing something wrong with the tuner/CI config, however I can't get my head around what is going wrong here.TV log shows nothing unusal for me:So, after hours of trying, any help is very much appreciated.wupperi</blockquote>

[QUOTE="wupperi, post: 855881, member: 54209"] Hello Forum, I just removed my old Digital Everywhere S2 tuners and moved to DD. I am using the following tuner setup: [LIST] [*]Digital Devices Cine S2 V6 [*]Two single slot CI modules attached to the Cine CT, each to one port on the Cine CT -> it is [U][B]NOT[/B][/U] the new dual CI card [/LIST] In DVBCineConfig tool I have assigned the CAM module in slot 1 to tuner 1, and the slot 2 CAM is assigned to tuner 2. So in theory for MePo it should look like two tuner with one CI and CAM attached to it. In MePo I configured each tuner to have a CAM configured with capabilities of descrambling one channel, so no MTD configured. Card settings are set to "Stop Card" and no preloading. When I try to watch FTA HD or SD channels they work perfectly fine on both tuners. However when I want to watch encrypted channels I only get the tuner 1 to work. Whenever I try to tune an unencrypted channel on tuner 2 I get a "Channel is scrambled" error. I know that my smartcards work in the respective CAMs since they did work with my old Digital Everywhere setup, so I must be doing something wrong with the tuner/CI config, however I can't get my head around what is going wrong here. TV log shows nothing unusal for me: So, after hours of trying, any help is very much appreciated. wupperi [/QUOTE]

Verification