Reply to thread

Message

<blockquote data-quote="Django.edwards" data-source="post: 806006" data-attributes="member: 98942">Hi mm,as you know, I'm always glad to provide you with some help. So ask if you need it.Can you explain me the difference of the different dll's? What is the difference of the tvlibrary, kscontrol and ksproperty Version?Should I do these tests with all versions? As you know, I own 2 KNC One TV-Station with single tuner, but each of them with a CI module. I did some tests with my current setup, and I can see, that I have always a problem with the DiseqC commands. It seems that the card is not able to tune or to reliable send out the diseqc commands. I have the feeling, that if the diseqc switch is switched into one position, the card can't switch him reliable to the other position. For example, i did some test while scanning a single transponder. I scanned both LNB with the same frequency (11240000) wich is located on Hotbird. When I scan this frequency on both LNB (Atra + Hotbird) the scan find the same channels on both LNB, which is not possible. In the logs I can see that the diseqc command are send propperly (simple A 0x00, and simple B 0x01) but it seems that the switch is not responding to that. These tests where made with the original 1.2.1 tvlibrary dll.So if you want, I can do this test also with the newer ones?RegardsDjango</blockquote>

[QUOTE="Django.edwards, post: 806006, member: 98942"] Hi mm, as you know, I'm always glad to provide you with some help. So ask if you need it. Can you explain me the difference of the different dll's? What is the difference of the tvlibrary, kscontrol and ksproperty Version? Should I do these tests with all versions? As you know, I own 2 KNC One TV-Station with single tuner, but each of them with a CI module. I did some tests with my current setup, and I can see, that I have always a problem with the DiseqC commands. It seems that the card is not able to tune or to reliable send out the diseqc commands. I have the feeling, that if the diseqc switch is switched into one position, the card can't switch him reliable to the other position. For example, i did some test while scanning a single transponder. I scanned both LNB with the same frequency (11240000) wich is located on Hotbird. When I scan this frequency on both LNB (Atra + Hotbird) the scan find the same channels on both LNB, which is not possible. In the logs I can see that the diseqc command are send propperly (simple A 0x00, and simple B 0x01) but it seems that the switch is not responding to that. These tests where made with the original 1.2.1 tvlibrary dll. So if you want, I can do this test also with the newer ones? Regards Django [/QUOTE]

Verification