Normal
Tried it a few more time, just looking at the tuner statui in Manual control, using 1st and 2nd tuners separately. Put both channels on the same tuner each time. Looks like my mistake -- sorry. Also did this a few more times, but watched the quality reading on manual control. The reading would 'occasionally' did to 90, 80, 70, 60, but was usually at 100. Dipped 7 times in one 2 minute period. I think this correlates pretty well with subjective viewing impression that the channel is fine. Then, I installed your newer tswriter, and repeated the previous test on 1.2.3, using tuner 2. 33 observed quality dips in 2 minutes -- but in limited looking, tv looks fine on tuner 2 (with tuner 1 disabled). Unfortunately, trying to record/watch 2 channels still has major problems, on tuner 2, or 1, or both (using the old tvLibrary.Interfaces. I'm really thinking there much be something wrong with my 2nd partition, or the whole installation. The 1.2.3 results just aren't making any sense. Cal
Tried it a few more time, just looking at the tuner statui in Manual control, using 1st and 2nd tuners separately. Put both channels on the same tuner each time. Looks like my mistake -- sorry.
Also did this a few more times, but watched the quality reading on manual control. The reading would 'occasionally' did to 90, 80, 70, 60, but was usually at 100. Dipped 7 times in one 2 minute period. I think this correlates pretty well with subjective viewing impression that the channel is fine.
Then, I installed your newer tswriter, and repeated the previous test on 1.2.3, using tuner 2. 33 observed quality dips in 2 minutes -- but in limited looking, tv looks fine on tuner 2 (with tuner 1 disabled). Unfortunately, trying to record/watch 2 channels still has major problems, on tuner 2, or 1, or both (using the old tvLibrary.Interfaces.
I'm really thinking there much be something wrong with my 2nd partition, or the whole installation. The 1.2.3 results just aren't making any sense.
Cal