Reply to thread

Message

<blockquote data-quote="Olodin" data-source="post: 98236" data-attributes="member: 10401">Operating System: WindowsXPInstalled Servicepack: SP2Product: floppydtvType: dvb-sRev.Number: HW Version: 1.24.1FW Version: 1.2.1 Build 33440BDA-Driver: 4.2.0CAM: noneCAM-Firmware Version: -CAM-Rev.: -Problem ONLY occurs if CAM inserted: NoProblem ONLY occurs with FW 1-2-0: n.a.Problem gone if removing power completely from PC: YesProblem gone when rebooting: YesProblem description:When changing channels TV will lock and not respond anymore. MediaPortal gets slow and is only responding after some timeout (~30sec).When closing MediaPortal and accessing the CI program of the FloppyDTV it also runs in an timeout and does not show any firmware information.The following log is written in error.log for MediaPortal:[code]2006-12-20 16:11:02.359375 [ERROR][6]: FireDTV:GetCAMStatus() failed 0x800700792006-12-20 16:11:39.484375 [ERROR][6]: DVBGraph: FAILED unable to start graph :0x800705AA2006-12-20 16:11:39.484375 [ERROR][6]: Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:Live-Fernsehen konnte nicht aktiviert werdenUnable to start graph time:36156,25 msec[/code]After rebooting everything works again until the next lock. Atm I have not tried doing a firmware downgrade because the FloppyDTV is not mine. Therefore I also have limited time for testing (probably a week).</blockquote>

[QUOTE="Olodin, post: 98236, member: 10401"] [b]Operating System:[/b] WindowsXP [b]Installed Servicepack:[/b] SP2 [b]Product:[/b] floppydtv [b]Type:[/b] dvb-s [b]Rev.Number:[/b] [b]HW Version:[/b] 1.24.1 [b]FW Version:[/b] 1.2.1 Build 33440 [b]BDA-Driver:[/b] 4.2.0 [b]CAM:[/b] none [b]CAM-Firmware Version:[/b] - [b]CAM-Rev.:[/b] - [b]Problem ONLY occurs if CAM inserted:[/b] No [b]Problem ONLY occurs with FW 1-2-0:[/b] n.a. [b]Problem gone if removing power completely from PC:[/b] Yes [b]Problem gone when rebooting:[/b] Yes [b]Problem description:[/b] When changing channels TV will lock and not respond anymore. MediaPortal gets slow and is only responding after some timeout (~30sec). When closing MediaPortal and accessing the CI program of the FloppyDTV it also runs in an timeout and does not show any firmware information. The following log is written in error.log for MediaPortal: [code] 2006-12-20 16:11:02.359375 [ERROR][6]: FireDTV:GetCAMStatus() failed 0x80070079 2006-12-20 16:11:39.484375 [ERROR][6]: DVBGraph: FAILED unable to start graph :0x800705AA 2006-12-20 16:11:39.484375 [ERROR][6]: Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:Live-Fernsehen konnte nicht aktiviert werdenUnable to start graph time:36156,25 msec [/code] After rebooting everything works again until the next lock. Atm I have not tried doing a firmware downgrade because the FloppyDTV is not mine. Therefore I also have limited time for testing (probably a week). [/QUOTE]

Verification