Reply to thread

Message

<blockquote data-quote="js016f" data-source="post: 1175437" data-attributes="member: 157508">I'm trying to set up the channels to work with the TV3 blaster. I have a USB-UIRT connected to a set top box that only outputs coax. I have IRSS set up, everything is set up to blast channels correctly when I test from the External Channel Changing screen, but when I try to preview an actual channel I get a Preview Failed: No Signal Detected error.Based on what I read in another thread, it sounds like the channel number should be the same on both the Edit Channel screen and the Tuning Detail screen, and then the frequency needs to be set to the correct frequency for the channel that the stb outputs (which is channel 4). So I tuned to channel 4 (which does work) and checked the TVService.log, and updated all the channels to use 67.25 as the frequency. However even after restarting the server, I still can't tune any channel besides 4. I checked the log again, and I see two lines that show the correct frequencycard: user: setuptv:3:-1 tune tv:WTIC (FOX) Freq:67250000 Channel:9 Country:United States analog:&nbsp; Tune:tv:WTIC (FOX) Freq:67250000 Channel:9 Country:United States Tuner:Cable then the TV3 Blaster Plugin successfully blasts the channel to the stb, but thenAnalog: Tuned to country:1 video:186000000 Hz audio:190500000 Hz locked:FalseSo it looks to me like the tv server is ignoring the frequency I told it to use and is instead using the frequency associated with the channel number.</blockquote>

[QUOTE="js016f, post: 1175437, member: 157508"] I'm trying to set up the channels to work with the TV3 blaster. I have a USB-UIRT connected to a set top box that only outputs coax. I have IRSS set up, everything is set up to blast channels correctly when I test from the External Channel Changing screen, but when I try to preview an actual channel I get a Preview Failed: No Signal Detected error. Based on what I read in another thread, it sounds like the channel number should be the same on both the Edit Channel screen and the Tuning Detail screen, and then the frequency needs to be set to the correct frequency for the channel that the stb outputs (which is channel 4). So I tuned to channel 4 (which does work) and checked the TVService.log, and updated all the channels to use 67.25 as the frequency. However even after restarting the server, I still can't tune any channel besides 4. I checked the log again, and I see two lines that show the correct frequency card: user: setuptv:3:-1 tune tv:WTIC (FOX) Freq:67250000 Channel:9 Country:United States analog: Tune:tv:WTIC (FOX) Freq:67250000 Channel:9 Country:United States Tuner:Cable then the TV3 Blaster Plugin successfully blasts the channel to the stb, but then Analog: Tuned to country:1 video:186000000 Hz audio:190500000 Hz locked:False So it looks to me like the tv server is ignoring the frequency I told it to use and is instead using the frequency associated with the channel number. [/QUOTE]

Verification