No detection of Theater 550 pro under installation.. (1 Viewer)

[Gunsmoke]

Here is my spec
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: AMD Athlon 64 X2 Dual Core 3800+
Memory: 2 GB
Motherboard: MS-7207PV (MSI) K8NGM2-FIR
RAM: Veritech 2048 MB CL 2,5
TV Card Model: Power Color Theater 550 PRO PCIe
TV Card Type: Hardware
TV Card Driver: 26441
Video Card Model: Nvidia Geforce 6150 (256 MB)
Video Card Driver: v82.05
Video Card Resolution: 1600x1200
Video Render Type: -
Audio Card Model: Realtek High Definition Audio
Audio Card Driver: v5.10.0.5247
Synopsis::

No detection of Theater 550 PRO, when setting up MediaPortal... :?

Error report:
No video capture card(s) were found, you won't be able to configure a capture card.


Found a tread here https://forum.team-mediaportal.com/viewtopic.php?t=11776&highlight=theater+theatre, but I don't understand the fiks :? Someone who can point me inthe right direction here

The Card and driver works fine under CyberLink PowerCinema 4.0

Thanks :wink:

 

[Gunsmoke]

Can it help to use a previous versjon of MP, inorder to resolve my problem?

 

[jrball]

I am running two ATI brand Elite tuner cards with RC3 with no problems. The first one was detected ok, but when I installed the second one, I had to set it up. I will be upgrading to RC4 shortly, so hopefully they will work.

 

[Gunsmoke]

I am running two ATI brand Elite tuner cards with RC3 with no problems. The first one was detected ok, but when I installed the second one, I had to set it up. I will be upgrading to RC4 shortly, so hopefully they will work.

Tried the RC3 and got this message:
Unable to create graph for this device

And after that it displays the Theater 550 pro in the capture card. But I cant tune channels :?

 

[marshall]

I have one of these cards, and it was a pain (sounds like you are having the same issues I had) until about two weeks ago when it (thankfully) started working with the latest RC and CVS.

Get all the latest drivers from ATI (it seems like it takes Powercolor a while to catch up with ATIs releases) and the latest software here, and you should be good to go.

 

[Gunsmoke]

I have one of these cards, and it was a pain (sounds like you are having the same issues I had) until about two weeks ago when it (thankfully) started working with the latest RC and CVS.

Get all the latest drivers from ATI (it seems like it takes Powercolor a while to catch up with ATIs releases) and the latest software here, and you should be good to go.

Thanks for replaying to my topic marshall :wink:

I will get the driver from ATI instead.. I'am upgrading my system board, so I will test it over the weekend

 

[jrball]

I have one of these cards, and it was a pain (sounds like you are having the same issues I had) until about two weeks ago when it (thankfully) started working with the latest RC and CVS.

Get all the latest drivers from ATI (it seems like it takes Powercolor a while to catch up with ATIs releases) and the latest software here, and you should be good to go.

Thanks for replaying to my topic marshall :wink:

I will get the driver from ATI instead.. I'am upgrading my system board, so I will test it over the weekend

I also downloaded the drivers from the website instead of using the supplied discs with the card. That may be the issue?

 

[Gunsmoke]

[quote="jrballI also downloaded the drivers from the website instead of using the supplied discs with the card. That may be the issue?[/quote]

ATI or PowerColor?

 

[jrball]

[quote="jrballI also downloaded the drivers from the website instead of using the supplied discs with the card. That may be the issue?

ATI or PowerColor?[/quote]

Here's what I used:

THEATER 550 PRO TV Tuner Drivers - 6.14.10.134
Remote Wonderâ„¢ Software Version 3.04.0.0 (ENGLISH)

I tried to link to the driver install page on ATI's website, but they don't allow direct linking for some reason.

You should be able to get to them on
http://www.ati.com/support/driver.html

I also am running Windows XP MCE 2005 version for the OS, so I'm not sure if that should make any difference on wheter or not the cards would work or not.

I didn't install any other drivers, or the PowerCinema software. Supposedly there is a security vunerability with that on boot.

 

[Gunsmoke]

[quote="jrballI also downloaded the drivers from the website instead of using the supplied discs with the card. That may be the issue?

ATI or PowerColor?

Here's what I used:

THEATER 550 PRO TV Tuner Drivers - 6.14.10.134
Remote Wonderâ„¢ Software Version 3.04.0.0 (ENGLISH)

I tried to link to the driver install page on ATI's website, but they don't allow direct linking for some reason.

You should be able to get to them on
http://www.ati.com/support/driver.html

I also am running Windows XP MCE 2005 version for the OS, so I'm not sure if that should make any difference on wheter or not the cards would work or not.

I didn't install any other drivers, or the PowerCinema software. Supposedly there is a security vunerability with that on boot.[/quote]

Thanks I'll trie that :wink:
I will report back on my results