Problem with Graph (WinTV PCI-FM) (1 Viewer)

[vuhuy]

Hello,

A few days ago, i bought a new TV-card for my computer, a WnTV PCI-FM. The card works well with the standard WinTV-applications and DScaler, but is doesn't work with MediaPortal. When I add my TV-card in the MediaPortal Configuration, it says 'Unable to create graph' two times. MediaPortal detected my TV-card as Hauppauge WinTV 88x Video Capture (Hauppauge WinTV-GO-Plus).

I have the InterVideo Video & Audio encoders installed on my pc (and if that isn't enough, the MainConcept encoders are installed too).

I've tried to edited CaptureCardDefinitions, but with no succes.

This is my card definition for my Hauppage WinTV 88x Video Capture:

  <capturecard commercialname="Hauppauge WinTV-GO-Plus" capturename="Hauppauge WinTV 88x Video Capture" 
  devid="ven_14f1&amp;dev_8800&amp;subsys_34010070&amp;rev_05">
    <capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"></capabilities>
    <tv>
      <interface cat="videncoder" video="" audio="" mpeg2="0"></interface>
      <filters>
        <filter cat="tvtuner" name="Hauppauge WinTV 88x Tuner" checkdevice="true"></filter>
        <filter cat="tvaudio" name="Hauppauge WinTV 88x TvAudio" checkdevice="true"></filter>
        <filter cat="crossbar" name="Hauppauge WinTV 88x Crossbar" checkdevice="true"></filter>
        <filter cat="capture" name="Hauppauge WinTV 88x Video Capture" checkdevice="true"></filter>
        <filter cat="audcapture" name="SB Live! Wave Device" checkdevice="true"></filter>
        <filter cat="videncoder" name="InterVideo Video Encoder" checkdevice="false"></filter>
        <filter cat="audencoder" name="InterVideo Audio Encoder" checkdevice="false"></filter>
        <filter cat="mux" name="InterVideo Multiplexer" checkdevice="false"></filter>
      </filters>
      <connections>
        <connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="1"></connection>
        <connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"></connection>
        <connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="7"></connection>
        <connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"></connection>
        <connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"></connection>
        <connection sourcefilter="audcapture" sourcepin="0" sinkfilter="audencoder" sinkpin="0"></connection>
        <connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"></connection>
        <connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"></connection>
      </connections>
    </tv>
  </capturecard>

In GraphEdit:


GraphEdit when I connect to a remote filter (MediaPortal started):


Piece of logfile:
*See attachment*

Anyone who have a idea what's wrong?

MediaPortal Version: 0.2.3.0
MediaPortal Skin: BlueTwo Wide
Windows Version: Windows XP Home Edition (Service Pack 3)
CPU Type: AMD Athlon(tm) 64 3500+, 2.2 GHz
HDD: WD 80GB (unkown type)
Memory: 2 GB
Motherboard: Asus a8V-VM
Video Card: (Overclocked) NVidia GeForce 7300LE 512MB
Video Card Driver: 6.14.0011.7519 (May 16, 2008)
Sound Card: Sound Blaster Live! 5.1
Sound Card Driver: 55.12.0001.3509 (August 8, 2001)
1. TV Card: Hauppauge WinTV PCI-FM
1. TV Card Type: Analogue TV-Card with TV / FM
1. TV Card Driver: 2.1.6.24167.0 (June 16, 2006)
MPEG2 Video Codec: InterVideo Video Encoder and the default MainConcept encoders
MPEG2 Audio Codec: InterVideo Audio Encoder and the default MainConcept encoders
Satelite/CableTV Provider: CableTV, Essent, Veghel, The Netherlands

 

[vuhuy]

Yeah.. i finally fixed the graph problem, but i still got one problem: there is sound, but no video? How do i fix this?

New CaputureCardDefinition:

  <capturecard commercialname="Hauppauge WinTV-GO-Plus" capturename="Hauppauge WinTV 88x Video 
  Capture" devid="ven_14f1&amp;dev_8800&amp;subsys_34010070&amp;rev_05">
    <capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"></capabilities>
    <tv>
      <interface cat="videncoder" video="" audio="" mpeg2="0"></interface>
      <filters>
        <filter cat="tvtuner" name="Hauppauge WinTV 88x Tuner" checkdevice="true"></filter>
        <filter cat="tvaudio" name="Hauppauge WinTV 88x TvAudio" checkdevice="true"></filter>
        <filter cat="crossbar" name="Hauppauge WinTV 88x Crossbar" checkdevice="true"></filter>
        <filter cat="capture" name="Hauppauge WinTV 88x Video Capture" checkdevice="true"></filter>
        <filter cat="audcapture" name="SB Live! Wave Device" checkdevice="false"></filter>
        <filter cat="videncoder" name="MainConcept MPEG Video Encoder" checkdevice="false"></filter>
        <filter cat="audencoder" name="MainConcept (Hauppauge) MPEG Audio Encoder" checkdevice="false"></filter>
      </filters>
      <connections>
        <connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="1"></connection>
        <connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"></connection>
        <connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="7"></connection>
        <connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"></connection>
        <connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"></connection>
        <connection sourcefilter="audcapture" sourcepin="0" sinkfilter="audencoder" sinkpin="0"></connection>
      </connections>
    </tv>
  </capturecard>

New Graph:


I've already tried other video encoders/decoders.
Thanks in advance.

 

[autumnmist]

TV-Server Version:
MediaPortal Version: 1.0 rc 2
MediaPortal Skin:
Windows Version: XP Pro

So, what version of MediaPortal are you using? I can't even find CaptureCardDefinitions.xml in my installation at all. (MP 1.0rc2)

 

[kesper]

Hi,

you mentioned you finally fixed the graph problem.
I also have the Hauppage 88x and encounter the "unable to create graph" error and would like to know how you have been able to fix the graph problem.

Thanks