- February 28, 2008
- 4
- 0
TV-Server Version: stand-alone
MediaPortal Version: 0.2.3
MediaPortal Skin: default
Windows Version: XP Home
CPU Type: AMD 4400 X2
HDD: Western Digital 500G
Memory: dual channel Kingston hyperX 2 gig
Motherboard: Biostar 6100-M9
Motherboard Chipset: nVidia
Motherboard Bios:
Video Card: XFX 6800GT
Video Card Driver: most recent
Sound Card: on board
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge PVR 350
1. TV Card Type:
1. TV Card Driver: most recent
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider: Dish Network (connected to hauppauge card via coax cable.
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Hi all, I am really sorry to bother you but this is the last thing I have yet to get figured out on my HTPC setup. I listed the specs above, I have Dish Network STB that is connected to my Hauppauge card via coax cable. I can easily get Sat channels with my tuner card set to channel 3 but I am unable to program Media Portal to change channels on my STB.
I have USB UIRT setup in media portal and have my STB program codes set as well as my remote control set. When I test the channel change in media portal config, it changes the channels no problem, but I am unable to get it to do it inside media portal from the program guide. I have tried several things and am still unable tog et it working. If someone cold point me to a tutorial on how to setup the channel programming in media portal config, I would be greatly appreciative. I have been working at this for like 4 weeks now hehe. I set the channel to be controlled by external STB and put in the correct channel number but still no luck. Do I need to put stuff in under the DVB or ATSC tabs? If so whee do I get that info to input it into the config screen?
If anyone is able to help me, thanks in advance for your trouble. I truly appreciate it.
Scottzilla
MediaPortal Version: 0.2.3
MediaPortal Skin: default
Windows Version: XP Home
CPU Type: AMD 4400 X2
HDD: Western Digital 500G
Memory: dual channel Kingston hyperX 2 gig
Motherboard: Biostar 6100-M9
Motherboard Chipset: nVidia
Motherboard Bios:
Video Card: XFX 6800GT
Video Card Driver: most recent
Sound Card: on board
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge PVR 350
1. TV Card Type:
1. TV Card Driver: most recent
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider: Dish Network (connected to hauppauge card via coax cable.
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Hi all, I am really sorry to bother you but this is the last thing I have yet to get figured out on my HTPC setup. I listed the specs above, I have Dish Network STB that is connected to my Hauppauge card via coax cable. I can easily get Sat channels with my tuner card set to channel 3 but I am unable to program Media Portal to change channels on my STB.
I have USB UIRT setup in media portal and have my STB program codes set as well as my remote control set. When I test the channel change in media portal config, it changes the channels no problem, but I am unable to get it to do it inside media portal from the program guide. I have tried several things and am still unable tog et it working. If someone cold point me to a tutorial on how to setup the channel programming in media portal config, I would be greatly appreciative. I have been working at this for like 4 weeks now hehe. I set the channel to be controlled by external STB and put in the correct channel number but still no luck. Do I need to put stuff in under the DVB or ATSC tabs? If so whee do I get that info to input it into the config screen?
If anyone is able to help me, thanks in advance for your trouble. I truly appreciate it.
Scottzilla