Netherlands
MediaPortal Version: 1.1 rc3
MediaPortal Skin: streamedmp
Windows Version: Windows 7 Ultimate x64
CPU Type: Intel Pentium E6600
HDD: 250GB IDE 7200rpm
Memory: 4GB kingston hyper X
Motherboard: ASUS p5w dh deluxe
Video Card: club 3d geforce 220gt
Video Card Driver: latest Nvidia
Sound Card: not used (using HDMI)
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV
1. TV Card Type:
1. TV Card Driver: 5.7
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: FFDSHOW
MPEG2 Audio Codec: FFDSHOW
h.264 Video Codec: CoreAVC
Satelite/CableTV Provider: Ziggo (NL - 5555)
HTPC Case:
Cooling:
Power Supply:
Remote:
TV: HD-Ready Samsung
TV - HTPC Connection: HDMI
Hello all.
First of all: MediaPortal is Kick Ass!
I know this is my first post...but i have been browsing the forum for some time now and tried to read through everything.
Slowly i'm working out all the cracks and learning all there is to know about setting up a smooth mediaportal htpc
However, i have a few problems i can not resolve.
My TV has a few channels that can't be watched.
the channels are (dutch but all on the same frequency (316000)
- SBS6
- RTL4, 5 and 7
When switching from SD channels to HD channels mediaportal sometims stops showing TV. i have to stop and start live tv before i have a picture again.
This also goes the other way aroung (HD to SD)
when i hit shift+1 i see a lot of dropped packets when whatching these channels.
I tried moving around with the codecs but this did not help.
I tried upgrading my alphacrypt firmware to v3.19 but this had no effect.
I have attached the logfiles generated by the watchdog.
If you can give me some advise or pointers in the good direction i would be very happy!
Thanks in advance, T
MediaPortal Skin: streamedmp
Windows Version: Windows 7 Ultimate x64
CPU Type: Intel Pentium E6600
HDD: 250GB IDE 7200rpm
Memory: 4GB kingston hyper X
Motherboard: ASUS p5w dh deluxe
Video Card: club 3d geforce 220gt
Video Card Driver: latest Nvidia
Sound Card: not used (using HDMI)
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV
1. TV Card Type:
1. TV Card Driver: 5.7
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: FFDSHOW
MPEG2 Audio Codec: FFDSHOW
h.264 Video Codec: CoreAVC
Satelite/CableTV Provider: Ziggo (NL - 5555)
HTPC Case:
Cooling:
Power Supply:
Remote:
TV: HD-Ready Samsung
TV - HTPC Connection: HDMI
Hello all.
First of all: MediaPortal is Kick Ass!
I know this is my first post...but i have been browsing the forum for some time now and tried to read through everything.
Slowly i'm working out all the cracks and learning all there is to know about setting up a smooth mediaportal htpc
However, i have a few problems i can not resolve.
My TV has a few channels that can't be watched.
the channels are (dutch but all on the same frequency (316000)
- SBS6
- RTL4, 5 and 7
When switching from SD channels to HD channels mediaportal sometims stops showing TV. i have to stop and start live tv before i have a picture again.
This also goes the other way aroung (HD to SD)
when i hit shift+1 i see a lot of dropped packets when whatching these channels.
I tried moving around with the codecs but this did not help.
I tried upgrading my alphacrypt firmware to v3.19 but this had no effect.
I have attached the logfiles generated by the watchdog.
If you can give me some advise or pointers in the good direction i would be very happy!
Thanks in advance, T