Reply to thread

Message

MediaPortal Version: 0.2.1.0
Windows Version: Windows XP Professional SP2
CPU Type: Intel Pentium III 700
HDD: Samsung 80MiB E-IDE
Memory: 640 MiB SDR
Motherboard: Gigabyte BX2000
Motherboard Chipset: Intel 440BX
Motherboard Bios: n/a
Video Card: HIS Radeon 9550
Video Card Driver:
Sound Card: Soundblaster PCI 1024
Sound Card AC3:
Sound Card Driver:
1. TV Card: n/a
1. TV Card Type: n/a
1. TV Card Driver: n/a
2. TV Card: n/a
2. TV Card Type: n/a
2. TV Card Driver: n/a
3. TV Card: n/a
3. TV Card Type: n/a
3. TV Card Driver: n/a
4. TV Card: n/a
4. TV Card Type: n/a
4. TV Card Driver: n/a
MPEG2 Video Codec: n/a
MPEG2 Audio Codec: n/a
Satelite/CableTV Provider: n/a
HTPC Case: Simple Desktop
Cooling: Fanless
Power Supply:
Remote: Medion MD 41169 via IRMan
TV: 4:3 CRT
TV - HTPC Connection: SCART (Peritel)

Hi,
I just updated to MP 0.2.1.0.
When I try to learn remote commands in the configuration app, all seems ok - pressing the remote keys again shows the correct action. But when closing and reopening the config app all learnings are _lost_. It's reproducible anytime.
As far as I can see the learned commands aren't stored anymore, in earlier versions of MP (0.2.0.0 and backwards) this was done in a file called 'remotevalues.xml'.
But such a file is neither read nor written in MP 0.2.1.0.

Any ideas? Please help - remoting is a fundamental thing of a mediacenter....

<edit>
Reproduction:
1. Goto Remote -> SerialUIR in the cnfig app
2. Learn some commands and verify that learing was successful
3. Close and reopen config app, previously learned commands are _lost_
4. You can repeat this several times, but the result is the same

The latest svn-snapshot also doesn't resolve this issue.
</edit>

Regards,
moh

<blockquote data-quote="moh" data-source="post: 87225" data-attributes="member: 18452">MediaPortal Version: 0.2.1.0Windows Version: Windows XP Professional SP2CPU Type: Intel Pentium III 700HDD: Samsung 80MiB E-IDEMemory: 640 MiB SDRMotherboard: Gigabyte BX2000Motherboard Chipset: Intel 440BXMotherboard Bios: n/aVideo Card: HIS Radeon 9550Video Card Driver: Sound Card: Soundblaster PCI 1024Sound Card AC3: Sound Card Driver: 1. TV Card: n/a1. TV Card Type: n/a1. TV Card Driver: n/a2. TV Card: n/a2. TV Card Type: n/a2. TV Card Driver: n/a3. TV Card: n/a3. TV Card Type: n/a3. TV Card Driver: n/a4. TV Card: n/a4. TV Card Type: n/a4. TV Card Driver: n/aMPEG2 Video Codec: n/aMPEG2 Audio Codec: n/aSatelite/CableTV Provider: n/aHTPC Case: Simple DesktopCooling: FanlessPower Supply: Remote: Medion MD 41169 via IRManTV: 4:3 CRTTV - HTPC Connection: SCART (Peritel)Hi,I just updated to MP 0.2.1.0.When I try to learn remote commands in the configuration app, all seems ok - pressing the remote keys again shows the correct action. But when closing and reopening the config app all learnings are _lost_. It's reproducible anytime.As far as I can see the learned commands aren't stored anymore, in earlier versions of MP (0.2.0.0 and backwards) this was done in a file called 'remotevalues.xml'.But such a file is neither read nor written in MP 0.2.1.0.Any ideas? Please help - remoting is a fundamental thing of a mediacenter....&lt;edit&gt;Reproduction:1. Goto Remote -&gt; SerialUIR in the cnfig app2. Learn some commands and verify that learing was successful3. Close and reopen config app, previously learned commands are _lost_4. You can repeat this several times, but the result is the sameThe latest svn-snapshot also doesn't resolve this issue.&lt;/edit&gt;Regards,moh</blockquote>

[QUOTE="moh, post: 87225, member: 18452"] [b]MediaPortal Version[/b]: 0.2.1.0 [b]Windows Version[/b]: Windows XP Professional SP2 [b]CPU Type[/b]: Intel Pentium III 700 [b]HDD[/b]: Samsung 80MiB E-IDE [b]Memory[/b]: 640 MiB SDR [b]Motherboard[/b]: Gigabyte BX2000 [b]Motherboard Chipset[/b]: Intel 440BX [b]Motherboard Bios[/b]: n/a [b]Video Card[/b]: HIS Radeon 9550 [b]Video Card Driver[/b]: [b]Sound Card[/b]: Soundblaster PCI 1024 [b]Sound Card AC3[/b]: [b]Sound Card Driver[/b]: [b]1. TV Card[/b]: n/a [b]1. TV Card Type[/b]: n/a [b]1. TV Card Driver[/b]: n/a [b]2. TV Card[/b]: n/a [b]2. TV Card Type[/b]: n/a [b]2. TV Card Driver[/b]: n/a [b]3. TV Card[/b]: n/a [b]3. TV Card Type[/b]: n/a [b]3. TV Card Driver[/b]: n/a [b]4. TV Card[/b]: n/a [b]4. TV Card Type[/b]: n/a [b]4. TV Card Driver[/b]: n/a [b]MPEG2 Video Codec[/b]: n/a [b]MPEG2 Audio Codec[/b]: n/a [b]Satelite/CableTV Provider[/b]: n/a [b]HTPC Case[/b]: Simple Desktop [b]Cooling[/b]: Fanless [b]Power Supply[/b]: [b]Remote[/b]: Medion MD 41169 via IRMan [b]TV[/b]: 4:3 CRT [b]TV - HTPC Connection[/b]: SCART (Peritel) Hi, I just updated to MP 0.2.1.0. When I try to learn remote commands in the configuration app, all seems ok - pressing the remote keys again shows the correct action. But when closing and reopening the config app all learnings are _lost_. It's reproducible anytime. As far as I can see the learned commands aren't stored anymore, in earlier versions of MP (0.2.0.0 and backwards) this was done in a file called 'remotevalues.xml'. But such a file is neither read nor written in MP 0.2.1.0. Any ideas? Please help - remoting is a fundamental thing of a mediacenter.... <edit> Reproduction: 1. Goto Remote -> SerialUIR in the cnfig app 2. Learn some commands and verify that learing was successful 3. Close and reopen config app, previously learned commands are _lost_ 4. You can repeat this several times, but the result is the same The latest svn-snapshot also doesn't resolve this issue. </edit> Regards, moh [/QUOTE]