TV-Server Version:
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: Default
Windows Version: Vista 32 SP1
CPU Type: AMD 64 x 2 Dual Core 4600+
HDD: Samsung 400gb
Memory: 1gb Kingston
Motherboard: Gigabit
Video Card: vidia GeForce 7600 GT
Video Card Driver: 7.15.11.6369
Sound Card: Onboard
Sound Card AC3: Optical Out
Sound Card Driver: 6.0.6000.16386
1. TV Card: Hauppauge Nova T 500
1. TV Card Type: DVB-T
1. TV Card Driver: 2.119.25023.0
2. TV Card: Hauppauge HVR 1300
2. TV Card Type: analog/DVB-T Hybrid
2. TV Card Driver: 2.119.25023.0
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: Foxtel (s-video into HVR-1300)
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection: Sub-D
Hello All,
I am exceptionally new to MediaPortal, and have jumped over to try it out after leaving MCE (cannot have FTA and Set Top box together), currently using myth but want a windows based/easier Setup. (So far so good too, except for this).
MY setup is teh Nova-T for the FTA DVB-T stuff. (Works a treat first go
!!!!)
My Foxtel (cable TV) I feed into HVR-1300 via the S-Video and the sound via stereo RCA (R/W).
The image and sound come through (again first pop) but this is the issue I get (Photo is better then words here) -> Flickr Photo Download: HVR-1300-STU-Svideo
As you can see I get a multi colour bar at the bottom of the image. Although if you dropped that bar, I think the aspect ratio is about right. I previously had another issue first, where the image was stretched up/down ways, and the bottom of the image was clipped (Rough guess probably about 1/8 of the image). So I installed the latest drivers on my HVR-1300 -> New Magic / Hauppauge Vista Driver Support Page and i get my current issue.
I did look through the forum but couldn't find too much which matched my problem, so here I am.
Thanks for reading.
Cheers
-J
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: Default
Windows Version: Vista 32 SP1
CPU Type: AMD 64 x 2 Dual Core 4600+
HDD: Samsung 400gb
Memory: 1gb Kingston
Motherboard: Gigabit
Video Card: vidia GeForce 7600 GT
Video Card Driver: 7.15.11.6369
Sound Card: Onboard
Sound Card AC3: Optical Out
Sound Card Driver: 6.0.6000.16386
1. TV Card: Hauppauge Nova T 500
1. TV Card Type: DVB-T
1. TV Card Driver: 2.119.25023.0
2. TV Card: Hauppauge HVR 1300
2. TV Card Type: analog/DVB-T Hybrid
2. TV Card Driver: 2.119.25023.0
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: Foxtel (s-video into HVR-1300)
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection: Sub-D
Hello All,
I am exceptionally new to MediaPortal, and have jumped over to try it out after leaving MCE (cannot have FTA and Set Top box together), currently using myth but want a windows based/easier Setup. (So far so good too, except for this).
MY setup is teh Nova-T for the FTA DVB-T stuff. (Works a treat first go
!!!!)My Foxtel (cable TV) I feed into HVR-1300 via the S-Video and the sound via stereo RCA (R/W).
The image and sound come through (again first pop) but this is the issue I get (Photo is better then words here) -> Flickr Photo Download: HVR-1300-STU-Svideo
As you can see I get a multi colour bar at the bottom of the image. Although if you dropped that bar, I think the aspect ratio is about right. I previously had another issue first, where the image was stretched up/down ways, and the bottom of the image was clipped (Rough guess probably about 1/8 of the image). So I installed the latest drivers on my HVR-1300 -> New Magic / Hauppauge Vista Driver Support Page and i get my current issue.
I did look through the forum but couldn't find too much which matched my problem, so here I am.
Thanks for reading.
Cheers
-J