Reply to thread

Message

<blockquote data-quote="arual" data-source="post: 410870" data-attributes="member: 80745">AC3 filter as a PostprocessingI have read that adding any postprocesing Filter killed the Hardware aceleration, but i had problems with some DTS tracks, so i had to add it, but the CPU usage is still below 10%, so i still have HW acele.Movies are ok, but i am having some problems with TV live.-Some DVB-T channels are showed and some times are not, but there is sound. -the TV live image is not so good as it used to be with another cocec config, it´s like it was an analogue signal, too much pixeled and the motion it´s not so smooth.- I have Aereo Theme On, i didn´t notice anything better.-When i set the Vsync On in to the ATI CCC, my secondary lcd on case (Zalman HD160xt Plus), starts flashing so i have to get the Vsync off.-When runing MediaPortal, and the TV live On with the menu on the left side and the small picture on the corner, all the screen is like flasing every 3-4 second, but this fenomenon stop when i set the picture to full screen. I dont´know if it´s something with the driver or the codec or the refresh rate.My Plasma only support 50 or 100 Hz, I have it to 50Hz.and the lcd touchscreen is set to 60 hz, (i dont´know íf it,s a matter). I´ll post the logs as soon i can. Also i´ll try to update to the lastest ATI driver. GA-78gm s2H with ati onboardAMD 4850Vista 32Aereo theme On.Hauppage 4000MediaPortal 1.01SAF 3.47Thanks for all , good job guys</blockquote>

[QUOTE="arual, post: 410870, member: 80745"] [b]AC3 filter as a Postprocessing[/b] I have read that adding any postprocesing Filter killed the Hardware aceleration, but i had problems with some DTS tracks, so i had to add it, but the CPU usage is still below 10%, so i still have HW acele. Movies are ok, but i am having some problems with TV live. -Some DVB-T channels are showed and some times are not, but there is sound. -the TV live image is not so good as it used to be with another cocec config, it´s like it was an analogue signal, too much pixeled and the motion it´s not so smooth. - I have Aereo Theme On, i didn´t notice anything better. -When i set the Vsync On in to the ATI CCC, my secondary lcd on case (Zalman HD160xt Plus), starts flashing so i have to get the Vsync off. -When runing MediaPortal, and the TV live On with the menu on the left side and the small picture on the corner, all the screen is like flasing every 3-4 second, but this fenomenon stop when i set the picture to full screen. I dont´know if it´s something with the driver or the codec or the refresh rate. My Plasma only support 50 or 100 Hz, I have it to 50Hz. and the lcd touchscreen is set to 60 hz, (i dont´know íf it,s a matter). I´ll post the logs as soon i can. Also i´ll try to update to the lastest ATI driver. GA-78gm s2H with ati onboard AMD 4850 Vista 32 Aereo theme On. Hauppage 4000 MediaPortal 1.01 SAF 3.47 Thanks for all , good job guys [/QUOTE]

Verification