Codecs SAF v6 (based on LAVF) (4 Viewers)

[JiRo]

Re: SAF v6.00 (based on LAVF)

SAF v.6.00 with LAVF works fine on my setup (Windows 7, MP 1.2.0, mini-itx ZOTAC ION MoBo + HDMI A/V) but only after ION (NVIDIA) drivers update. Do not forget on it. Before update... terrible = snapshot of my face

Hoborg again.

JiRo.

 

[Thor2605]

AW: SAF v6.00 (based on LAVF)

Ok it works fine to by me, but i have 2 questions. I use the Audio Render Changer, when i switch from TV to AVR i must stop the Video and play again, than my AVR gets the DTS, Dolby etc. When i don't stop the video, nothing comes to my AVR he show me only PCM.

And a other problem, when i have 2 audiolines, the first is ac3 2.0 and the second DTS, i will switch to the second line (DTS) but my AVR shows only PCM.

Sorry but with ARC you cannot change LAVF with regkeys...

I don't know why and I cannot find out because on my development pc there LAVF-decoder is not inserted in Graph an cannot be inserted if Graph was built by MePo!

 

[hoborg]

Re: SAF v6.00 (based on LAVF)

BTW, anyone have problems with selected language durning SAF install?

 

[biship]

Re: SAF v6.00 (based on LAVF)

For some reason the audio pin on the splitter does not connect to anything in graphstudio.
The video pin connects to ffdshow DVXA video decoder.
I've installed 5.02 and 6.00 (latest ver) over and over.
I've tried de-registering and re-registering ffdshow.ax
Any ideas what to try next?

 

[hoborg]

Re: SAF v6.00 (based on LAVF)

For some reason the audio pin on the splitter does not connect to anything in graphstudio.
The video pin connects to ffdshow DVXA video decoder.
I've installed 5.02 and 6.00 (latest ver) over and over.
I've tried de-registering and re-registering ffdshow.ax
Any ideas what to try next?

Did you enable audio passthrough durning saf install?

 

[biship]

Re: SAF v6.00 (based on LAVF)

For some reason the audio pin on the splitter does not connect to anything in graphstudio.
The video pin connects to ffdshow DVXA video decoder.
I've installed 5.02 and 6.00 (latest ver) over and over.
I've tried de-registering and re-registering ffdshow.ax
Any ideas what to try next?

Did you enable audio passthrough durning saf install?

Yes I did.

 

[hoborg]

Re: SAF v6.00 (based on LAVF)

For some reason the audio pin on the splitter does not connect to anything in graphstudio.
The video pin connects to ffdshow DVXA video decoder.
I've installed 5.02 and 6.00 (latest ver) over and over.
I've tried de-registering and re-registering ffdshow.ax
Any ideas what to try next?

Did you enable audio passthrough durning saf install?

Yes I did.

Then reinstall SAF and this time do not enable it.

 

[Thor2605]

AW: Re: SAF v6.00 (based on LAVF)

Did you enable audio passthrough durning saf install?

Yes I did.

Then reinstall SAF and this time do not enable it.

That was my problem too, that the Splitter can't connect when the graph was built with MePo!

But disabling passthrough didn't solve the issue...

 

[hoborg]

Re: AW: Re: SAF v6.00 (based on LAVF)

But disabling passthrough didn't solve the issue...

Some MePo LOGs?
Make sure you are using Default audio renderer in MePo setting.

 

[Thor2605]

AW: SAF v6.00 (based on LAVF)

I posted Logs here
But no answer yet...

Default Renderer is already setted!