Scanning Satellite 19.2 is naming the channels 10000 Only (1 Viewer)

[haccor]

MediaPortal Version: 1.3.0

Description
As above, all channels are being scanned as channel 10000
I have just upgraded from MP 1.2.3 and not had this problem. I did a complete fresh install between upgrade.

Steps to Reproduce:
Run a scan on 19.2 satellite using a disecq set to simple b. Select=ed Enable DVB-S2 and channel movement detection

 

[Holzi]

Setting this one to "bug" for now. We are investigating.
Thanks!

 

[Sebastiii]

Hi,
After some test :
Autogenerated number was removed in 1.3.0 and replaced by a default value (10000) when TsWriter didn't find LCN (Logical Channel Number)
That mean before when TsWriter didn't find LCN, Autogenerated number was filled, now it's a default value

I quote riksmith answer :
If we want an LCN to use when zapping they have two options:

1. Assign an LCN manually in SetupTV
2. Use the "Select channel by index" option. That we they can zap using the order of the channels in the channel list.

Thanks

 

[HomeY]

Since we got to the bottom of this, i'll set thread to 'No Bug'

 

[Holzi]

I set this to "no bug".

See:

As said by Sebastiii the 10.000 for the LCN is not a bug. In the previous versions of MP we chose to show an incorrect generated LCN, now we have chosen to only show LCN's which we can find on the network. There is already experimental work going on to extend the number of LCN TsWriter can find on the network, but it is going to take a long time before that code will go public.

Thanks!

 

[Owlsroost]

There is an experimental TsWriter.ax here - https://forum.team-mediaportal.com/...annels-suddenly-picked-up.117183/#post-976750 - with a bug fix for a scanning problem, which might be worth trying.

 

[Holzi]

So @haccor if you wanna test.