Second tuner autotunes but... (1 Viewer)

[gag_reflex]

I'm running two Dvico DVB-T HDTV tuners. 1st card is a Fusion DVB-T and the second is the Fusion DVB-T Lite. Both are installed and working on MCE 2005 RU2.

When I fire up the configuration application for MediaPortal all looks good, I can autotune with both cards and configure everything up without the slightest hitch. In MediaPortal however, when it tries to use the second card I get 'unable to create graph' errors. The first card works without a hitch. As mentioned this is running on Windows XP MCE 2005 RU2 so the multi tuner patch shouldn't be required??

PLEASE HELP!!

 

[Marcusb]

One tip is to set one card to a higher priority. (MP Config/TV/ TV Cards)

It seems to work best this way.
Experiment with each card. Maybe the second card would work best if it is the first used card.

 

[gag_reflex]

Well after an evening experimenting,...

The second card doesn't want to play no matter what i do.
constant "Failed to Capture filter->MPEG2 demultiplexer" errors
This occurs to EITHER card. It doesn't matter which card is set as #1, the card set as #2 will always throw up the error

Here's the log:
4/07/2006 10:48:37 PM Recorder: use free card Dvico FusionHDTV DVB-T Lite prio:10 namevico FusionHDTV DVB-T Lite
4/07/2006 10:48:37 PM Recorder: start watching on cardvico FusionHDTV DVB-T Lite channel:Nine
4/07/2006 10:48:37 PM TVCapture.Start Viewing() Card:2 :Nine
4/07/2006 10:48:37 PM Command:MediaPortal.TV.Recording.ViewTvCommand failed reason:Failed to start TV
Failed to Capture filter->MPEG2 demultiplexer time:78.125 msec

 

[Taipan]

What version of the Dvico drivers are you using - the latest ones (v3.41) seem to be giving a few people problems, but v3.30.01 seems to be OK?

 

[gag_reflex]

The drivers definately aren't the latest.. I learnt awhile back that once you have a stable working version, dont update the driver! :lol:
I'm at work at the moment so I can't check the version.