MediaPortal Version: 0.2.2.0
MediaPortal Skin: MCE BLUE Skin
Windows Version: Win. XP Service pack 2
CPU Type: Intel Pentium 4 - 3.2 ghz
HDD: Maxtor
Memory: 1,00 gb ram
Motherboard: Asrock 775dual-vsta
Motherboard Chipset: Northbridge
Motherboard Bios:
Video Card: Nvidia Geforce 7300 LE
Video Card Driver:
Sound Card: Realtek hd audio
Sound Card AC3:
Sound Card Driver:
1. TV Card: Asus p7131 dual
1. TV Card Type: analog,dvb-t
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Problem -
I use the setup wizard in mediaportal, but after choosing ( in my case) Denmark - All regions, and clicking on Next MP shuts down and comes up with a failure
What can this be, because the tv card have worked with mp before. Please help, so i can be finished with my media pc.
UPDATE! more details!- Found out by trying to tune in the channels trhourgh the setup mediaportal.exe it is not the dvb-t part it is the analogue part. I choose denmark and cable as input source and hits scan and the the error comes up - IT is the configuration.exe it is wrong with --
- Error Log
pastebin didn't work so i have påosted the error log below:
--------------------------------- Starting here ----------------------------------
2007-03-19 16:15:55.000000 [ERROR][MPMain]: OnMessage exception
ystem.ArgumentException: channelname is empty
at MediaPortal.TV.Recording.ViewTvCommand..ctor(String channelName)
at MediaPortal.TV.Recording.Recorder.StartViewing(String channel, Boolean TVOnOff, Boolean timeshift, Boolean wait, String& errorMessage)
at MediaPortal.GUI.TV.GUITVHome.ViewChannelAndCheck(String channel)
at MediaPortal.GUI.TV.GUITVHome.OnClicked(Int32 controlId, GUIControl control, ActionType actionType)
at MediaPortal.GUI.Library.GUIWindow.OnMessage(GUIMessage message)
2007-03-19 16:16:55.468750 [ERROR][12]: DVBGraphBDA:FAILED tuning to frequency:506000 kHz ONID:-1 TSID:-1, SID:-1. cannot get locator
2007-03-19 16:16:55.468750 [ERROR][12]: MediaPortal: Unhandled exception occured
2007-03-19 16:16:55.484375 [ERROR][12]: Exception
ystem.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'DShowNET.MPSA.IStreamAnalyzer'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{FB1EF498-2C7D-4FED-B2AA-B8F9E199F074}' failed due to the following error: En sådan grænseflade understøttes ikke (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
at DShowNET.MPSA.IStreamAnalyzer.ResetParser()
at MediaPortal.TV.Recording.DVBGraphBase.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Recording.TVCaptureDevice.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Scanning.DVBTTuning.Tune(Int32 offset)
at MediaPortal.TV.Scanning.DVBTTuning.Next()
at WindowPlugins.GUISettings.Wizard.GUIWizardScanBase.ScanThread()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2007-03-19 16:16:55.484375 [ERROR][12]: Exception :Unable to cast COM object of type 'System.__ComObject' to interface type 'DShowNET.MPSA.IStreamAnalyzer'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{FB1EF498-2C7D-4FED-B2AA-B8F9E199F074}' failed due to the following error: En sådan grænseflade understøttes ikke (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
2007-03-19 16:16:55.484375 [ERROR][12]: site :Int32 ResetParser()
2007-03-19 16:16:55.484375 [ERROR][12]: source :Core
2007-03-19 16:16:55.484375 [ERROR][12]: stacktrace: at DShowNET.MPSA.IStreamAnalyzer.ResetParser()
at MediaPortal.TV.Recording.DVBGraphBase.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Recording.TVCaptureDevice.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Scanning.DVBTTuning.Tune(Int32 offset)
at MediaPortal.TV.Scanning.DVBTTuning.Next()
at WindowPlugins.GUISettings.Wizard.GUIWizardScanBase.ScanThread()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
---------------------------- the end ------------------------------
MediaPortal Skin: MCE BLUE Skin
Windows Version: Win. XP Service pack 2
CPU Type: Intel Pentium 4 - 3.2 ghz
HDD: Maxtor
Memory: 1,00 gb ram
Motherboard: Asrock 775dual-vsta
Motherboard Chipset: Northbridge
Motherboard Bios:
Video Card: Nvidia Geforce 7300 LE
Video Card Driver:
Sound Card: Realtek hd audio
Sound Card AC3:
Sound Card Driver:
1. TV Card: Asus p7131 dual
1. TV Card Type: analog,dvb-t
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Problem -
I use the setup wizard in mediaportal, but after choosing ( in my case) Denmark - All regions, and clicking on Next MP shuts down and comes up with a failure
What can this be, because the tv card have worked with mp before. Please help, so i can be finished with my media pc.
UPDATE! more details!- Found out by trying to tune in the channels trhourgh the setup mediaportal.exe it is not the dvb-t part it is the analogue part. I choose denmark and cable as input source and hits scan and the the error comes up - IT is the configuration.exe it is wrong with --
- Error Log
pastebin didn't work so i have påosted the error log below:
--------------------------------- Starting here ----------------------------------
2007-03-19 16:15:55.000000 [ERROR][MPMain]: OnMessage exception
at MediaPortal.TV.Recording.ViewTvCommand..ctor(String channelName)
at MediaPortal.TV.Recording.Recorder.StartViewing(String channel, Boolean TVOnOff, Boolean timeshift, Boolean wait, String& errorMessage)
at MediaPortal.GUI.TV.GUITVHome.ViewChannelAndCheck(String channel)
at MediaPortal.GUI.TV.GUITVHome.OnClicked(Int32 controlId, GUIControl control, ActionType actionType)
at MediaPortal.GUI.Library.GUIWindow.OnMessage(GUIMessage message)
2007-03-19 16:16:55.468750 [ERROR][12]: DVBGraphBDA:FAILED tuning to frequency:506000 kHz ONID:-1 TSID:-1, SID:-1. cannot get locator
2007-03-19 16:16:55.468750 [ERROR][12]: MediaPortal: Unhandled exception occured
2007-03-19 16:16:55.484375 [ERROR][12]: Exception
at DShowNET.MPSA.IStreamAnalyzer.ResetParser()
at MediaPortal.TV.Recording.DVBGraphBase.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Recording.TVCaptureDevice.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Scanning.DVBTTuning.Tune(Int32 offset)
at MediaPortal.TV.Scanning.DVBTTuning.Next()
at WindowPlugins.GUISettings.Wizard.GUIWizardScanBase.ScanThread()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2007-03-19 16:16:55.484375 [ERROR][12]: Exception :Unable to cast COM object of type 'System.__ComObject' to interface type 'DShowNET.MPSA.IStreamAnalyzer'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{FB1EF498-2C7D-4FED-B2AA-B8F9E199F074}' failed due to the following error: En sådan grænseflade understøttes ikke (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
2007-03-19 16:16:55.484375 [ERROR][12]: site :Int32 ResetParser()
2007-03-19 16:16:55.484375 [ERROR][12]: source :Core
2007-03-19 16:16:55.484375 [ERROR][12]: stacktrace: at DShowNET.MPSA.IStreamAnalyzer.ResetParser()
at MediaPortal.TV.Recording.DVBGraphBase.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Recording.TVCaptureDevice.Tune(Object tuningObject, Int32 disecqNo)
at MediaPortal.TV.Scanning.DVBTTuning.Tune(Int32 offset)
at MediaPortal.TV.Scanning.DVBTTuning.Next()
at WindowPlugins.GUISettings.Wizard.GUIWizardScanBase.ScanThread()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
---------------------------- the end ------------------------------