Reply to thread

Message

<blockquote data-quote="mm1352000" data-source="post: 1190209" data-attributes="member: 82144">Okay.So, the current tuning process is:<ol>
<li data-xf-list-type="ol">Send DiSEqC switch command if necessary (not necessary if no switch is present).</li>
<li data-xf-list-type="ol">Send DiSEqC motor move command if necessary (not necessary if no motor is present OR the motor is already in the right place).</li>
<li data-xf-list-type="ol">Tune the tuner (&quot;Submit tunerequest calling put_TuneRequest&quot;).</li>
<li data-xf-list-type="ol">Wait for the tuner to lock on signal (&quot;LockInOnSignal&quot;).</li>
</ol>The problem is that there is no delay between 2 and 3. You can add/configure the delay for 4 (tune timeout setting) but that doesn't help (as you've seen) because the tuner has given up already.Do you understand?This problem would affect all tuners, not just your SkyStar. So, no point in getting a new tuner.Now I guess you're going to ask: is it possible to add a delay between 2 and 3?In theory the answer is yes. The code is there and a delay can be inserted.In practise the answer is no. TV Server is under code freeze, so changes are not being accepted.Therefore it would be better for you if it's possible to find a way to solve the problem without code changes. The best (only?) way would be to use your tuner's relock monitor. I would suggest:<ul>
<li data-xf-list-type="ul">RelockMonitor should be 1</li>
<li data-xf-list-type="ul">RelockEnable should be 1</li>
<li data-xf-list-type="ul">try increasing RelockTrigTime</li>
</ul>You need to reboot for the driver to apply the change.</blockquote>

[QUOTE="mm1352000, post: 1190209, member: 82144"] Okay. So, the current tuning process is: [LIST=1] [*]Send DiSEqC switch command if necessary (not necessary if no switch is present). [*]Send DiSEqC motor move command if necessary (not necessary if no motor is present OR the motor is already in the right place). [*]Tune the tuner ("Submit tunerequest calling put_TuneRequest"). [*]Wait for the tuner to lock on signal ("LockInOnSignal"). [/LIST] The problem is that there is no delay between 2 and 3. You can add/configure the delay for 4 (tune timeout setting) but that doesn't help (as you've seen) because the tuner has given up already. Do you understand? This problem would affect all tuners, not just your SkyStar. So, no point in getting a new tuner. Now I guess you're going to ask: is it possible to add a delay between 2 and 3? In theory the answer is yes. The code is there and a delay can be inserted. In practise the answer is no. TV Server is under code freeze, so changes are not being accepted. Therefore it would be better for you if it's possible to find a way to solve the problem without code changes. The best (only?) way would be to use your tuner's relock monitor. I would suggest: [LIST] [*]RelockMonitor should be 1 [*]RelockEnable should be 1 [*]try increasing RelockTrigTime [/LIST] You need to reboot for the driver to apply the change. [/QUOTE]

Verification