- October 1, 2006
- 104
- 5
- 50
- Home Country
-
New Zealand
Hi guys just updated to RC1 same old problem with getting TVserver to 'see' my skystar2 card took me a while to find out/remember how to do it... Download the latest driver from the technisat website, its a 35MB or so zip file. Inside this file is another zip file called Technisat BDA 4.4.1.zip or something similar. Unzip the contents of this folder somewhere obvious. Uninstall your satellite card from the device manager. Reboot. When 'new hardware detected' window pops up, point it to the folder you just saved the BDA driver to, and install that driver. Reboot again. Viola! Your card should appear in the tvserver program now. For those of you in New Zealand using freeview, go to mcraenz very helpful website for info on how what .ini and satellite.xml files you need to put in the relevant folders, as well as the LNB settings. Wroked for me anyway! I originally used the driver that came with the card, no joy, did this and works perfectly!
Good luck,
Matt
Not sure if Im allowed (mods?) but am happy to upload the 900k or so bda driver zip file to this site to save you d/ling the whole 35meg file from the technisat site. If I can, let me know and ill post it...
Cheers
Good luck,
Matt
Not sure if Im allowed (mods?) but am happy to upload the 900k or so bda driver zip file to this site to save you d/ling the whole 35meg file from the technisat site. If I can, let me know and ill post it...
Cheers