Sweden
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: Blue2
Windows Version: XP SP2
CPU Type: AMD X2 4400+
HDD: SGBIV 40GB (OS+MP)+ WDC 500GB (Storage)
Memory: 2GB DDR2 Corsair XMS
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: On-board
Video Card Driver: Latest (per 2008-10-05)
Sound Card: On-board
Sound Card AC3: Coaxial out via S/PDIF bracket
Sound Card Driver: Latest (per 2008-10-05)
1. TV Card: AverMedia M150-D (same as M1500)
1. TV Card Type: analog
1. TV Card Driver: 1.0.6.14
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
h.264 Video Codec: FFD-Show?
Satelite/CableTV Provider: ComHem
HTPC Case: Antec NSK2480
Cooling: Scythe Ninja Mini
Power Supply: Antec EA380
Remote: Keysonic 540RF
TV: Panasonic PX80
TV - HTPC Connection: DVI
Tried to search, but I didn't find any matching posts.
Anyway, on to the story...
Decided to upgade to 1.0.0.0 RC2 the other day, but this led to MP refusing to start.
So I re-installed XP and downloaded all the updates. Also got the latest drivers for the MoBo from Gigabytes website. Lastly I finally managed to get hold of a newer driver for my TV-card (AverMedia M150).
Started MP and made a scan, found about as many channels as could be expected (both the signal strength and signal quality bars were almost 100%)- but when I try to watch TV through MP all I get is a "no signal" message.
Uninstalled the TV-Card and re-installed it with the older drivers that worked before with my earlier version of MP - still the same result.
Finally I installed the AverMedia Ultra-TV application, and using this I have no problems watching TV - but I'd sort of prefer to go the MP-route...
Have unplugged the card and re-started the computer a couple of times, but none of this has had any effect.
Basically I'm thinking of simply retiring the Aver TV-card and possibly get a Hauppauge instead, but then the cheap skate in me starts to protest
Any ideas? - cause I'm all out of inspiration at the moment.
/M
MediaPortal Skin: Blue2
Windows Version: XP SP2
CPU Type: AMD X2 4400+
HDD: SGBIV 40GB (OS+MP)+ WDC 500GB (Storage)
Memory: 2GB DDR2 Corsair XMS
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: On-board
Video Card Driver: Latest (per 2008-10-05)
Sound Card: On-board
Sound Card AC3: Coaxial out via S/PDIF bracket
Sound Card Driver: Latest (per 2008-10-05)
1. TV Card: AverMedia M150-D (same as M1500)
1. TV Card Type: analog
1. TV Card Driver: 1.0.6.14
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
h.264 Video Codec: FFD-Show?
Satelite/CableTV Provider: ComHem
HTPC Case: Antec NSK2480
Cooling: Scythe Ninja Mini
Power Supply: Antec EA380
Remote: Keysonic 540RF
TV: Panasonic PX80
TV - HTPC Connection: DVI
Tried to search, but I didn't find any matching posts.
Anyway, on to the story...
Decided to upgade to 1.0.0.0 RC2 the other day, but this led to MP refusing to start.
So I re-installed XP and downloaded all the updates. Also got the latest drivers for the MoBo from Gigabytes website. Lastly I finally managed to get hold of a newer driver for my TV-card (AverMedia M150).
Started MP and made a scan, found about as many channels as could be expected (both the signal strength and signal quality bars were almost 100%)- but when I try to watch TV through MP all I get is a "no signal" message.
Uninstalled the TV-Card and re-installed it with the older drivers that worked before with my earlier version of MP - still the same result.
Finally I installed the AverMedia Ultra-TV application, and using this I have no problems watching TV - but I'd sort of prefer to go the MP-route...
Have unplugged the card and re-started the computer a couple of times, but none of this has had any effect.
Basically I'm thinking of simply retiring the Aver TV-card and possibly get a Hauppauge instead, but then the cheap skate in me starts to protest
Any ideas? - cause I'm all out of inspiration at the moment.
/M