Germany
MediaPortal Version: 1.2.3
Description
Hi there,
I am using the Digital Devices Cine S2 - Dual DVB-S2 HDTV (Rev. V6) card in my TVServer. The card is connected to two CAM modules from Digital Devices. In DVBCineconfig I have assigned both CAMs to each tuner. Since my CAMs can descramble multiple channels and I have different smartcards in each CAM this setup is required.
When tuning to a channel, I am getting the famous "unable to create graph" error. There is a TVLibrary.dll and a TVLibrary.interfaces.dll out which however only was compiled for 1.2.1 Version and has not been further developed. Using these two patched DLLs do not produce this error and will tune to scrambled and non-scrambled channels. The thread can be seen at https://forum.team-mediaportal.com/threads/digital-devices-cascaded-cam-support.102051/
Looking at Mantis however I don't see this bug being recorded.
Logs showing the problem and logs with the patched DLLs attached.
Steps to Reproduce:
1) Assign both CAMs to both tuners using DVBCineconfig
2) Reboot
3) Open TVServer configuration
4) Map a scrambled channel to both tuners
5) Try manual timeshifting of scrambled channel
Description
Hi there,
I am using the Digital Devices Cine S2 - Dual DVB-S2 HDTV (Rev. V6) card in my TVServer. The card is connected to two CAM modules from Digital Devices. In DVBCineconfig I have assigned both CAMs to each tuner. Since my CAMs can descramble multiple channels and I have different smartcards in each CAM this setup is required.
When tuning to a channel, I am getting the famous "unable to create graph" error. There is a TVLibrary.dll and a TVLibrary.interfaces.dll out which however only was compiled for 1.2.1 Version and has not been further developed. Using these two patched DLLs do not produce this error and will tune to scrambled and non-scrambled channels. The thread can be seen at https://forum.team-mediaportal.com/threads/digital-devices-cascaded-cam-support.102051/
Looking at Mantis however I don't see this bug being recorded.
Logs showing the problem and logs with the patched DLLs attached.
Steps to Reproduce:
1) Assign both CAMs to both tuners using DVBCineconfig
2) Reboot
3) Open TVServer configuration
4) Map a scrambled channel to both tuners
5) Try manual timeshifting of scrambled channel