Twinhan DTV Sat MyTV unuseable (1 Viewer)

[infinite.loop]

General Information:
If you experience the same problem like described below, post a reply with your hardware specs (please use the template) and a small summery.

if you use a Twinhan DTV Sat and you have no problems please also post a reply with your hardware specs (please use the template) and a small summery!

Area: MyTV
CPU Type: AMD Duron 1700+
Memory: 512 MB DDR 400 PC3200
Motherboard: Shuttle FX43
Motherboard Chipset: VIA KM400 + VT8237
Video Card: VIA UniChrome 128-bit 2D/3D Graphics Engine
TV Card: Twinhan DTV Sat Ci
TV Card Type: software
TV Card Driver: BDA 1.2.2.0 www.digitalrise.biz

Case1:

Video Render Type: overlay
Video Codec Type & Version: MPEG2DEC filter / WinDVD7 / DScaler
Audio Codec Type & Version: MPEG/AC3/DTS/LPCM / WinDVD7 / DScaler

timeshift is dissabled

1. straight to MyTV.
-----Picture is playing
-----Audio is playing
-----CPU Load: CPU Load about 45%

2. start recording.
result:
-----Picture is playing after 5 seconds black
-----Audio is playing after 10 seconds mute
-----CPU Load: CPU Load about 60%

3. stop recording.
result:
-----Picture is playing after 10 seconds black
-----Audio is playing after 10 seconds mute
-----CPU Load: CPU Load about 50%

4. activate Timeshift.
result:
-----Picture is playing after 5 seconds black
-----Audio is playing after 5 seconds mute
-----CPU Load: CPU Load about 70%

5. Timeshift -30 seconds.
result:
-----Picture is playing after 5 seconds black
-----Audio is playing after 5 seconds mute
-----CPU Load: CPU Load about 70%
-----notes: no GUI displayed

6. switched to another free TV channel.
result:
-----channel has changed after 10 seconds
-----Picture is stuttering
-----Audio is stuttering
-----CPU Load: 100%

7. go to fullscreen mode.
result:
-----Picture is stuttering after 25 seconds black
-----Audio is stuttering after 25 seconds mute
-----CPU Load: 100%

8. exit to homescreen
-----Mediaportal is showing HomeScreen
-----CPU Load: 10%
-----notes: it tooks 1 minute to leave MyTV

9. exit Mediaportal
-----Mediaportal has closed
-----CPU Load: 5%
-----notes:​

Case2:

Video Render Type: VMR9 renderless
Video Codec Type & Version: MPEG2DEC filter / WinDVD7 / DScaler
Audio Codec Type & Version: MPEG/AC3/DTS/LPCM / WinDVD7 / DScaler

timeshift is dissabled

1. straight to MyTV.
-----Picture is stuttering
-----Audio is stuttering
-----CPU Load: 100%

2. start recording.
result:
---Picture is stuttering after 15 seconds freezed
-----Audio is stuttering after 15 seconds mute
-----CPU Load: 100%

3. stop recording.
result:
---Picture is stuttering after 15 seconds freezed
-----Audio is stuttering after 15 seconds mute
-----CPU Load: 100%

4. activate Timeshift.
result:
---Picture is stuttering after 10 seconds freezed
-----Audio is stuttering after 10 seconds mute
-----CPU Load: 100%

5. Timeshift -30 seconds.
result:
mediaportal crashed
​

Case3:

Video Render Type: VMR9 renderless
Video Codec Type & Version: MPEG2DEC filter / WinDVD7 / DScaler
Audio Codec Type & Version: MPEG/AC3/DTS/LPCM / WinDVD7 / DScaler

timeshift is dissabled

1. straight to MyTV.
-----Picture is stuttering
-----Audio is stuttering
-----CPU Load: 100%

2. switched to another free TV channel.
result:
mediaportal crashed
​

 

[Koschel]

Area: MyTV
CPU Type: Intel P4 2.8GHz (Northwood)
Memory: 512 MB DDR 400 PC3200
Motherboard: Asus P4P800e deLuxe
Motherboard Chipset: Intel 865
Video Card: ATI 9600
TV Card: Twinhan DTV DVB-S
TV Card Type: software
TV Card Driver: BDA 1.2.2.0


Fresh windows installation, all updates, bda 1.2.2.0 for twinhan, mp 0.2RC1 is not able to setup the card. Can't not create directshow graph. Card not useable

 

[imported_Esperado]

The problem has been described in other threads.
See:http://mediaportal.elite-squad.net/forum/showthread.php?t=112
It is the same for Pinnacle, some Hauppauge and other dvb cards.
It is a generic problem in connection with TV capture.DLL
(Directshow is not able to connect the tee filter to BDA digital capture driver of the card: missing or wrong properties)
It is not in conjunction with any bad configuration or harware issue.
Can-you replace the TVcapture.dll file by an older working one of V0.130, and confirm that your card is working again with this file?

If this is confirmed, is-it enough for infinityloop, now, to group the threads about this *same* very critical bug (MP v0.2 is just usable to play tetris;-) and report -it in an accurate way in Mantis ?

 

[infinite.loop]

The problem has been described in other threads.
See:http://mediaportal.elite-squad.net/forum/showthread.php?t=112
It is the same for Pinnacle, some Hauppauge and other dvb cards.
It is a generic problem in connection with TV capture.DLL
(Directshow is not able to connect the tee filter to BDA digital capture driver of the card: missing or wrong properties)
It is not in conjunction with any bad configuration or harware issue.
Can-you replace the TVcapture.dll file by an older working one of V0.130, and confirm that your card is working again with this file?

If this is confirmed, is-it enough for infinityloop, now, to group the threads about this *same* very critical bug (MP v0.2 is just usable to play tetris;-) and report -it in an accurate way in Mantis ?

iam sorry but you are not right.
Koschel has allready found out what caused the "Can't not create directshow graph" problem. he will post his results after more testing

 

[imported_Esperado]

I'll add two samples of remote graph from graphedit in my original post.
One with the new dll, one with the old.
Juste have a look.

 

[Koschel]

I've got 2 PCs working with the twinhan (1.2.20) and 0.2rc1, both with TVCapure.dll came with the 0.2RC1. Definitly the Skystar 2 needs an older version of this dll, to record. (Thread here )
The results of the testing and a how-to are following.

 

[imported_Esperado]

I've got 2 PCs working with the twinhan (1.2.20) and 0.2rc1, both with TVCapure.dll came with the 0.2RC1. Definitly the Skystar 2 needs an older version of this dll, to record. (Thread here )
The results of the testing and a how-to are following.

"you're not right", answears Infinityloop.
It looks like he does not want of this bug ;-)

 

[Koschel]

I'll add two samples of remote graph from graphedit in my original post.
One with the new dll, one with the old.
Juste have a look.

Please, do so. I'm very interested.

 

[Smirnuff]

Guys I took a quick look at the code around the area where the error is reported to the log and to be honest there isn't a great deal that can go wrong at the MP side, instead it would appear that the required filter is not registered, although that filter is implemented in ksproxy.ax which is a key player in DirectShow so I find it very strange that this error is occuring but would ask that those who experience the problem navigate to:

%systemroot%\system32

And once then confirm that they have a ksproxy.ax and take note of its version number, if it is there you may wish to do a:

regsvr32 %systemroot%\system32\ksproxy.ax

And then try once more, the relevant code was added the day prior to the RC being built.

For reference, my version number is 5.3.2600.2180.

Cheers,
Smirnoff.

 

[infinite.loop]

@Smirnoff
thanks for your reply

if i have got you right the ksproxy.ax could be reponseable for the "Can't not create directshow graph" problem right?

that would explain why some people cant get the Nova-T working and some people have no problem with this TV-card.

i will have a look if the ksproxy.ax is registered in my HTPC (i dont have this "Can't not create directshow graph")
maybe it is also causing the issues i have posted.

thanks for your advice