Spain
Hi,
I have an USB Hauppauge capture card (WinTV Nova-T-HD) that comes with a slim remote. Making this remote to work on MP 1.0.0 is being a nightmare.
I have tried with the three Hauppauge remote configurations (45, 34 and 21 buttons), but none of them seems to function. After clicking on Learn and then Start Learning, it looks like the remote signals are reaching the configuration application, since each time I press a button on the remote, the selection moves to the next button. But on the Current X10 column (why X10?!?!?) the value is always '0' no matter which button I have pressed.
On the log, I see the following after clicking on the four cursor buttons (up, down, right and left) on the remote:
2009-01-09 23:49:40.554203 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:40.594260 [Info.][6]: HCW: received: CMD|0|-8589700655050135072~
2009-01-09 23:49:40.594260 [Info.][6]: HCW: Accepted: CMD|0|-8589700655050135072
2009-01-09 23:49:40.604275 [Info.][6]: HCW: elapsed time: 359
2009-01-09 23:49:40.604275 [Info.][6]: HCW: sameCommandCount: 0
2009-01-09 23:49:40.614289 [Info.][6]: HCW: same command, timeout true
2009-01-09 23:49:40.644332 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:40.724448 [Info.][6]: HCW: repeat filter accepted: 0
2009-01-09 23:49:40.734462 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:40.744476 [Info.][6]: HCW: received: CMD|0|-8589700655048332480~
2009-01-09 23:49:40.754491 [Info.][6]: HCW: Accepted: CMD|0|-8589700655048332480
2009-01-09 23:49:40.754491 [Info.][6]: HCW: elapsed time: 180
2009-01-09 23:49:40.754491 [Info.][6]: HCW: sameCommandCount: 0
2009-01-09 23:49:40.754491 [Info.][6]: HCW: same command, timeout false
2009-01-09 23:49:40.754491 [Info.][6]: HCW: received: CMD|0|-8589700655047431184~
2009-01-09 23:49:40.754491 [Info.][6]: HCW: Accepted: CMD|0|-8589700655047431184
2009-01-09 23:49:40.754491 [Info.][6]: HCW: elapsed time: 90
2009-01-09 23:49:40.754491 [Info.][6]: HCW: sameCommandCount: 1
2009-01-09 23:49:40.754491 [Info.][6]: HCW: same command, timeout false
2009-01-09 23:49:40.814577 [Info.][6]: HCW: repeat filter accepted: 0
2009-01-09 23:49:45.691590 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:45.691590 [Info.][6]: HCW: received: CMD|0|-8589700654997859904~
2009-01-09 23:49:45.691590 [Info.][6]: HCW: Accepted: CMD|0|-8589700654997859904
2009-01-09 23:49:45.691590 [Info.][6]: HCW: elapsed time: 957
2009-01-09 23:49:45.691590 [Info.][6]: HCW: sameCommandCount: 2
2009-01-09 23:49:45.691590 [Info.][6]: HCW: same command, timeout true
2009-01-09 23:49:45.691590 [Info.][6]: HCW: repeat filter accepted: 0
It seems there is a difference between the four buttons, but on MP they all behave the same, ie, like I had pressed the Back button. I have checked the Mappings settings and they do seem to be alright, having a different action assigned for each button.
Any help appreciated.
Fran
MediaPortal Version: 1.0.0
MediaPortal Skin: Blue3
Windows Version: XP Prof
CPU Type: Centrino 1,4GHz
Video Card: ATI
I have an USB Hauppauge capture card (WinTV Nova-T-HD) that comes with a slim remote. Making this remote to work on MP 1.0.0 is being a nightmare.
I have tried with the three Hauppauge remote configurations (45, 34 and 21 buttons), but none of them seems to function. After clicking on Learn and then Start Learning, it looks like the remote signals are reaching the configuration application, since each time I press a button on the remote, the selection moves to the next button. But on the Current X10 column (why X10?!?!?) the value is always '0' no matter which button I have pressed.
On the log, I see the following after clicking on the four cursor buttons (up, down, right and left) on the remote:
2009-01-09 23:49:40.554203 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:40.594260 [Info.][6]: HCW: received: CMD|0|-8589700655050135072~
2009-01-09 23:49:40.594260 [Info.][6]: HCW: Accepted: CMD|0|-8589700655050135072
2009-01-09 23:49:40.604275 [Info.][6]: HCW: elapsed time: 359
2009-01-09 23:49:40.604275 [Info.][6]: HCW: sameCommandCount: 0
2009-01-09 23:49:40.614289 [Info.][6]: HCW: same command, timeout true
2009-01-09 23:49:40.644332 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:40.724448 [Info.][6]: HCW: repeat filter accepted: 0
2009-01-09 23:49:40.734462 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:40.744476 [Info.][6]: HCW: received: CMD|0|-8589700655048332480~
2009-01-09 23:49:40.754491 [Info.][6]: HCW: Accepted: CMD|0|-8589700655048332480
2009-01-09 23:49:40.754491 [Info.][6]: HCW: elapsed time: 180
2009-01-09 23:49:40.754491 [Info.][6]: HCW: sameCommandCount: 0
2009-01-09 23:49:40.754491 [Info.][6]: HCW: same command, timeout false
2009-01-09 23:49:40.754491 [Info.][6]: HCW: received: CMD|0|-8589700655047431184~
2009-01-09 23:49:40.754491 [Info.][6]: HCW: Accepted: CMD|0|-8589700655047431184
2009-01-09 23:49:40.754491 [Info.][6]: HCW: elapsed time: 90
2009-01-09 23:49:40.754491 [Info.][6]: HCW: sameCommandCount: 1
2009-01-09 23:49:40.754491 [Info.][6]: HCW: same command, timeout false
2009-01-09 23:49:40.814577 [Info.][6]: HCW: repeat filter accepted: 0
2009-01-09 23:49:45.691590 [Info.][1]: HCWHelper: command sent: 0
2009-01-09 23:49:45.691590 [Info.][6]: HCW: received: CMD|0|-8589700654997859904~
2009-01-09 23:49:45.691590 [Info.][6]: HCW: Accepted: CMD|0|-8589700654997859904
2009-01-09 23:49:45.691590 [Info.][6]: HCW: elapsed time: 957
2009-01-09 23:49:45.691590 [Info.][6]: HCW: sameCommandCount: 2
2009-01-09 23:49:45.691590 [Info.][6]: HCW: same command, timeout true
2009-01-09 23:49:45.691590 [Info.][6]: HCW: repeat filter accepted: 0
It seems there is a difference between the four buttons, but on MP they all behave the same, ie, like I had pressed the Back button. I have checked the Mappings settings and they do seem to be alright, having a different action assigned for each button.
Any help appreciated.
Fran
MediaPortal Version: 1.0.0
MediaPortal Skin: Blue3
Windows Version: XP Prof
CPU Type: Centrino 1,4GHz
Video Card: ATI