Reply to thread

Message

<blockquote data-quote="bryndabella" data-source="post: 483796" data-attributes="member: 96113">Thank you both for your replys, I still have a problem but your responses have lead me closer to a route cause I think.I can scan one of the tuners on the Pinnacle 3010ix card and then map the channels on to all three cards (2 x Dvb-T on the Pinnacle and 1 Dvb-T on the Hauppauge).&nbsp; I can then record BBC1, change channel to ITV1 and record that. Which tells me that the Pinnacle card is working with both tuners as BBC and ITV1 are form different MUX.&nbsp; I am not able to now change to Channel 5, which is on a another MUX.&nbsp; The error message is that there is no signal to start timeshifting.&nbsp; This tells me that there is no signal on the Hauppauge card.I now go back into TV Server set up and scan the Hauppauge card successfully.&nbsp; I now go into manual control and start timeshifting, timeshifting starts on the Hauppauge Card, but this is the lowest priority card.&nbsp; If I now disable the Hauppauge card and attempt to timeshiftt in manual control.&nbsp; I get a message saying no signal from the Pinnacle Card (which was previously working).If I set them up with the Hauppauge Card as No 1 priority and scan them in priority order ie Hauppauge then Pinnacle and attempt to timeshift in manual control, timeshifting starts on the pinnacle card which has a lower priority than the Hauppauge card.&nbsp; So scanning the Pinnacle card has cleared the hauppauge card, evn though channels are mapped to it.If I do the reverse and scan the Pinnacle Card first then the Hauppauge Card, the go into the TV Client and attempt to record a show from one MUX and watch a show from another, I get a error message saying &quot;Unable to start timeshifting, no signal&quot;.&nbsp; So again this tells me that the scanning of the Hauppauge Card has cleared the channels from the Pinnacle Card.So it appears to me that the Hauppauge HD HVR400 is not compatible with the Pinnacle 3010ix.&nbsp; Does any one know of a work around or a fix?Any help would be greatly appreciated.</blockquote>

[QUOTE="bryndabella, post: 483796, member: 96113"] Thank you both for your replys, I still have a problem but your responses have lead me closer to a route cause I think. I can scan one of the tuners on the Pinnacle 3010ix card and then map the channels on to all three cards (2 x Dvb-T on the Pinnacle and 1 Dvb-T on the Hauppauge). I can then record BBC1, change channel to ITV1 and record that. Which tells me that the Pinnacle card is working with both tuners as BBC and ITV1 are form different MUX. I am not able to now change to Channel 5, which is on a another MUX. The error message is that there is no signal to start timeshifting. This tells me that there is no signal on the Hauppauge card. I now go back into TV Server set up and scan the Hauppauge card successfully. I now go into manual control and start timeshifting, timeshifting starts on the Hauppauge Card, but this is the lowest priority card. If I now disable the Hauppauge card and attempt to timeshiftt in manual control. I get a message saying no signal from the Pinnacle Card (which was previously working). If I set them up with the Hauppauge Card as No 1 priority and scan them in priority order ie Hauppauge then Pinnacle and attempt to timeshift in manual control, timeshifting starts on the pinnacle card which has a lower priority than the Hauppauge card. So scanning the Pinnacle card has cleared the hauppauge card, evn though channels are mapped to it. If I do the reverse and scan the Pinnacle Card first then the Hauppauge Card, the go into the TV Client and attempt to record a show from one MUX and watch a show from another, I get a error message saying "Unable to start timeshifting, no signal". So again this tells me that the scanning of the Hauppauge Card has cleared the channels from the Pinnacle Card. So it appears to me that the Hauppauge HD HVR400 is not compatible with the Pinnacle 3010ix. Does any one know of a work around or a fix? Any help would be greatly appreciated. [/QUOTE]

Verification