MP 1.3.0 Alpha (3 Viewers)
This forum will be used to discuss the development of 1.3.0 Alpha
It's strange. I have it running on one RTM box, no problems at all, but I can't get it working on another box... same Windows version... damn :)
You *could* just run it in a VM... they have 3D and all the fancy stuff as well now, so you should be fine for testing... :)
It's strange. I have it running on one RTM box, no problems at all, but I can't get it working on another box... same Windows...
Guys
Would be great if you would support Windows 8 RTM for installation.
When trying to install, I get "Your operating system is...
Can you look in the Windows Application log (Control Panel -> Admin tools -> Event Viewer -> Windows Log -> Application) and find when the error was actually generated (and post what the error message says) - then I can relate it to the TsReader log entries.
Also, can you attach a TsReader log for the channel when it's playing live...
Can you look in the Windows Application log (Control Panel -> Admin tools -> Event Viewer -> Windows Log -> Application) and find...
Several times recently, I have received a windows error box which says tsreader.ax has crashed. The box contains 3 options: close...
I'm not sure if this is a bug in MP or specifically with the comskip plugin, or how it should be. I can't say I can remember trying to do this with previous versions. When playing a recorded tv program if you pause the show then skip forward a chapter the show does not continue to play unless you press pause again then press play...
I'm not sure if this is a bug in MP or specifically with the comskip plugin, or how it should be. I can't say I can remember...
I'm not sure if this is a bug in MP or specifically with the comskip plugin, or how it should be. I can't say I can remember...
Not sure if the logs will show this or not but I know I didn't have this issue with V1.2.3. When watching tv if the show is paused for any amount of time, then the channel is changed the channel is changed but not seen until the timeshift catches up to when the channel was changed. Previous versions if there was a show paused for...
Not sure if the logs will show this or not but I know I didn't have this issue with V1.2.3. When watching tv if the show is paused...
Not sure if the logs will show this or not but I know I didn't have this issue with V1.2.3. When watching tv if the show is paused...
Thanks Deda, just one of those annoying little inconsistencies that crop up from time to time ;)
Thanks Deda, just one of those annoying little inconsistencies that crop up from time to time ;)
Hi @Deda
Would be nice to be able to not only remove one of the above, which does work whilst a first scan is done, but also for...
I don't believe this is a big issue but on accident I left Mediaportal Configuration open, then started MP, and noticed that no remote buttons I pressed did anything. I could hear the audio confirmation but the screen stayed at the main start up screen. I could use the mouse with no problem. Issue went away if I closed the config...
I don't believe this is a big issue but on accident I left Mediaportal Configuration open, then started MP, and noticed that no...
I don't believe this is a big issue but on accident I left Mediaportal Configuration open, then started MP, and noticed that no...
I normally don't use the settings section from within MP, but since 1.3a is a new install or me, I had a browse through it.
In the Settings/TV section within MP, there are settings for enabing coloured buttons,genres, and genre map. They're all on by default. The option to highlight the selected program in the guide by putting a...
I normally don't use the settings section from within MP, but since 1.3a is a new install or me, I had a browse through it.
In...
I normally don't use the settings section from within MP, but since 1.3a is a new install or me, I had a browse through it.
In...
Some followup. I tried removing and re-adding my exceptions for the firewall allow program settings. Some of the options Windows just would not let me uncheck, kind of kooky. I unchecked and re-added what I could, and re-ran my scan. It found two of the channels that were previously missed, but then dropped one formerly found...
Some followup. I tried removing and re-adding my exceptions for the firewall allow program settings. Some of the options Windows...
I'm having a problem when I try to view a couple of channels from the MP TV screens, and the preview screen in TV config. In MP...
MP1
MP2
[confirm]
Installink to redistribution package of C++ 2010 not working - causing error during setup
DE
Was something changed on the server side or something, regarding the supplied intallers for VC++ that get pulled down during the 1.3a install?
I ended up having to start from scratch again, so I figured I'd get some logs this time around.
After Win 7 install, ATI 12.6 drivers were installed, which installed VC++ 2010 x64 only. I...
Was something changed on the server side or something, regarding the supplied intallers for VC++ that get pulled down during the...
https://forum.team-mediaportal.com/threads/please-help-trouble-installing.110319/#post-892366
had this too with a fresh install -...
For as far as i know there is no unmount code for BDs, except for the 'rape code' (this UNmounts ISO_1 when you select ISO_2 while ISO_1 is still playing), so this doesn't seem to be a bug.
@Deda con you confirm?
(We might wanna consider auto UNmount for BD a Beta feature to keep code consistent?)
For as far as i know there is no unmount code for BDs, except for the 'rape code' (this UNmounts ISO_1 when you select ISO_2 while...
Hi
I have set up Virtual Clone Drive ver. 5.4.5 to automount image files in MP 1.3.0 so that I can select and play .iso from the...
Thanks Deda, I din´t find that post earlyer. I got some help, so I try those options... Let´s see how it goes. :)
Thanks Deda, I din´t find that post earlyer. I got some help, so I try those options... Let´s see how it goes. :)
Hello,
I upgrade my 1.2.3 installation to 1.3.0 alpha to test it. I found out one very irritating problem.
First of all, the...
You need to post logs so that we can follow what you are doing and where it is going wrong.
You need to post logs so that we can follow what you are doing and where it is going wrong.
I noticed that while my playlist was being built with scrobble on, I cannot go and hit the x to delete any songs from the playlist.
Sience I did the upgrade to 1.3 I experiance this error during watching TV. Attached the Logs.
When I "OK" the error it starts playing back the Timeshift ... I need to restart MP to get it up again
Sience I did the upgrade to 1.3 I experiance this error during watching TV. Attached the Logs.
When I "OK" the error it starts...
Sience I did the upgrade to 1.3 I experiance this error during watching TV. Attached the Logs.
When I "OK" the error it starts...
I closed MP and reinstalled OnlineVideos as it wasn't working. Now when I try and start MP it gets stuck on Caching and if I try and look at the Program Data/MP/Cache folder it says it's inaccessible.
Now, after killing MP, the Cache folder has disappeared and MP still can't start.
OK, I've manually created the Cache folder again...
I closed MP and reinstalled OnlineVideos as it wasn't working. Now when I try and start MP it gets stuck on Caching and if I try...
I closed MP and reinstalled OnlineVideos as it wasn't working. Now when I try and start MP it gets stuck on Caching and if I try...
Actually it doesn't seem to be working properly on this system either, as it's set to "Refresh every 240mins" but on some occassions it's restarting the grab straight after the previous one finishes updating the database and others it's starting about 150mins after the last one.
Actually it doesn't seem to be working properly on this system either, as it's set to "Refresh every 240mins" but on some...
When doing an EPG update the other day, it took about two hours. I don't have a STB to compare but I've been advised it should only...
Thanks for the explanation. I am running on my PC which I use for other stuff at the moment (hence the dual-screen, although I wasn't actively doing anything else at the time but maybe the browser was open and triggered something) so it may be I never see this on my other PC, which whilst not a dedicated HTPC at least runs any other...
Thanks for the explanation. I am running on my PC which I use for other stuff at the moment (hence the dual-screen, although I...
I was either in the Now Playing screen or the Home screen when this error occurred (the error popup appears on my monitor rather...
Look really Nice :)
Look really Nice :)
First report of this problem you can find in this post (also logs are attached). My very short analysis you can find in this post...
Whilst LiveTV was playing, I tried to change the Theme from PVHD 1080 to PVHD and MP completely locked up. I had to VNC in and Ctrl+Alt+Del to open Task Manager and kill MP from there.
If it's not possible to change Theme whilst LiveTV is playing and it's going to cause MP to lock up perhaps there could be a way to disable this...
Whilst LiveTV was playing, I tried to change the Theme from PVHD 1080 to PVHD and MP completely locked up. I had to VNC in and...
Whilst LiveTV was playing, I tried to change the Theme from PVHD 1080 to PVHD and MP completely locked up. I had to VNC in and...
I changed "General/Volume Settings/Control" from Wave to Master Volume, but the behaviour is still the same. If I only have my ATI HDMI audio device enabled in the system without the onboard devices for speaker output / spdif / etc. I typically get the hang up after 3 times hibernating / responding.
With the (unused) onboard sound...
I changed "General/Volume Settings/Control" from Wave to Master Volume, but the behaviour is still the same. If I only have my ATI...
The last times, the MediaPortal GUI was completely frozen after resuming from hibernate.
The GUI showed an old frame with the time...
Hi tourettes
No, I'm only using analog output and have the onboard AMD HDMI device disabled in Task Manager.
Hi tourettes
No, I'm only using analog output and have the onboard AMD HDMI device disabled in Task Manager.
After resuming from standby this morning and starting LiveTV, I found that pressing my Mute button displayed the on-screen mute...
Thanks MM. Glad we were able to sort things out my friend.
Thanks MM. Glad we were able to sort things out my friend.
Hello,
I recently did a clean install of MP 1.3.0 to see if the 22Khz switching issue has been addressed?.
MM, had kindly...
I don't know if this really belongs in this section but it does have to do with the new color EPG.
Attached is my TVguide xml. i was trying the new color epg and i noticed something which makes it less useful than it could be. If you look at my tvguide xml you'll see that it has 3 different category for each program such as...
I don't know if this really belongs in this section but it does have to do with the new color EPG.
Attached is my TVguide xml. i...
I don't know if this really belongs in this section but it does have to do with the new color EPG.
Attached is my TVguide xml. i...
I've been finding that after resuming from standby, LiveTV shows render times of around 16ms and there are sync problems because of this. If I close MP and restart it this seems to fix the problem and render times drop to 4-6ms.
The attached logs were made just after I noticed the problem this afternoon and closed MP.
I've been finding that after resuming from standby, LiveTV shows render times of around 16ms and there are sync problems because of...
I've been finding that after resuming from standby, LiveTV shows render times of around 16ms and there are sync problems because of...
@doveman: I wouldn't necessarily disregard, considering the discussion about random glitches that we're having in the other thread. ;)
@doveman: I wouldn't necessarily disregard, considering the discussion about random glitches that we're having in the other thread. ;)
I should say that with previous versions, the Signal Level and Quality didn't tend to change once I started manual timeshifting in...
The error is reported on earlier versions, and mm has done a lot of work to identify and patch the problem at 1.2. The problem is not described in Mantis. My intentions to report the bug is to get it described and the merging planned.
Problem is described in...
The error is reported on earlier versions, and mm has done a lot of work to identify and patch the problem at 1.2. The problem is...
The error is reported on earlier versions, and mm has done a lot of work to identify and patch the problem at 1.2. The problem is...
I just ran BackupSettings and did a full uninstall and cleanup of MediaPortal and reinstalled it along with plugins and extensions and then imported all my BackupSettings. The offending menu didn't change and still only shows Videos at the bottom. Maybe the problem lies in some BackupSetting that remained and reimported the flaw in...
I just ran BackupSettings and did a full uninstall and cleanup of MediaPortal and reinstalled it along with plugins and extensions...
I tried but could not build a database using Videos, whereas MovingPictures builds everything exactly from my filenames...
- Poll
For me, lav in DXVA mode seems to work quite well with my blurays and it has very low CPU consumption, many times it is 1-2%.
When using DXVA copy back I had some click sounds using audio bitstreaming, while I didn't had them with DXVA native or with CPU mode.
For me, lav in DXVA mode seems to work quite well with my blurays and it has very low CPU consumption, many times it is 1-2%...
Hello - can you give me the recommended settings for Blu-Ray playback please, in particular the codecs?
I can select Menu, Title1...
This has been a bug for a long time, and I have reported this before but up to now nothing seems to have been done about it...: Updating deletes all custom WebEPG files! No warning or anything, it is just gone after updating :s
Why is that??
This has been a bug for a long time, and I have reported this before but up to now nothing seems to have been done about it...
This has been a bug for a long time, and I have reported this before but up to now nothing seems to have been done about it...
Hi,
there is a mismatch of group - groupnames in programlist. see attached files.
Hi,
there is a mismatch of group - groupnames in programlist. see attached files.
Hi,
there is a mismatch of group - groupnames in programlist. see attached files.
When refreshing an actor's information from the dialogVideoInfo window (check Cast and either click Refresh or select Actor and select Dialog Action "1 Refresh selected actor info"), the actor's information is refreshed, but no image is loaded and previously existing images are deleted. When refreshing a movie's actor info in the MP...
When refreshing an actor's information from the dialogVideoInfo window (check Cast and either click Refresh or select Actor and...
When refreshing an actor's information from the dialogVideoInfo window (check Cast and either click Refresh or select Actor and...