CyberSimian

I have never use a HdHomeRun, so the following is based only on what I have read elsewhere. I believe that the HdHomeRun setup tool has a specific setting that you need to enable in order for...

MP is a volunteer project. I would make these points: People with the necessary skills need to volunteer to spend their time improving and maintaining MP, all without pay. If no one volunteers...

Collect the log files in a zip file, and then click the "Attach files" button to upload the zip file to this thread. -- from CyberSimian in the UK

You will need to setup the EPG grabber, but there is no point in spending time on that until you have got a successful channel scan (a scan that has the correct channel names). Sadly, MP no...

I have never used TV via DVB-C, so I don't know what problems are common with DVB-C, or how to solve them :(. Possibly @Pablik has an idea? DVB-C is very similar to DVB-T (which is what I use)...

For MP1, you can use the same file. It needs to be placed in this folder: C:\ProgramData\Team MediaPortal\MediaPortal TV Server\TuningParameters\dvbc\ For MP2, there are three different TV...

This looks like the problem described in this thread. It seems that MP is using the wrong symbol rate for the scan. For some tuners, the value should be multiples of one thousand, while for other...

My experience: I currently use MP 1.33 64-bit on Windows 7 64-bit with 7GB of RAM. Prior to that I used MP 1.31 32-bit on Windows 7 64-bit with 7GB of RAM. Prior to that I used MP 1.24 32-bit on...

I have a different opinion. If the system is used as a normal PC, then you should definitely not use such an old OS. But as a pure media player that's not a problem. I have been using Windows 7...

I don't know what the problem is, so I can only suggest some possibilities for you to investigate. (1) The network adapter on the motherboard has developed a fault. Did you go to Windows "Device...

MP 1.31 was entirely 32-bit. Installing MP 1.33 32-bit or MP 1.34 32-bit over MP 1.31 32-bit should work without problem. The problems arise when you try to install MP 64-bit over an existing MP...

This setting exist for DVB-T, DVB-S, DVB-C and DVB-IP, not for ATSC, nor for Analog. ;)

One point about channel scans: when channels move, the default action is for TV Server to add the new channel to the existing list of channels, and to leave the old non-working channel in the...

I have never used satellite TV, so I am not familiar with the common problems that can occur when using it. However, the file tvserver_TsWriter.log has these lines repeated many times...

I regret to inform you that upgrading from 32-bit MP to 64-bit MP is not as simple as running the 64-bit installer. :( I would suggest following the procedure described in this post. I would...