2 DVB-T cards tunning different channel frecuencies (1 Viewer)

[CX23882-19]

Try this:
1) Go to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HCW88BDA\Parameters]
2) Create a new DWORD called TunerRemap
3) Set its value to 0
4) Reboot
5) Remove all channels and rescan from scratch

 

[juandionis]

I will try this tonigth.

Be aware that I will follow your recommendation with no clue about what this mean. This is MP spirit in this forum


thanks for your interest
Juan

 

[CX23882-19]

It's an override for Hauppauge's driver behaviour. Setting it to 1 (default) produces the current drivers' behaviour. Setting it to 0 I'm told will produce the old drivers' behaviour.

I'm not able to verify myself at this time.

 

[juandionis]

First try No luck. I did not have key Parameters, so I created that one and follow your instructions, but no success.

I did not have too much time to play around this. My drivers are the latest ones 3.1B? if I remember well. Maybe I had to try with the previous one.

I will keep you posted

Juan

 

[juandionis]

No luck. But I have found this info in the Italian web of Hauppauge

http://www.hauppauge.de/ital/pages/support/support_canali-rai-mce.html

Does some one know how can I use the "UseFreqOffSetDVBT" feature mentioned there?

maybe is the way to solve my problem

Thanks

Juan

 

[juandionis]

Just to inform you that I changed that Registry Key to 167, and the two cards seems to work OK together with no problem. The scanning was made with the KNC card.

Let me say that in the last DVBt tunning parameters for Spain there is no OFFSET specify and some cards like KNC will not find any channel.

Juan