AIW 9600 SE stuttering sound (1 Viewer)

[cmccreery]

Ok so I just got my AIW 9600 PRO se working with the TV. One minor issue is that the audio stutters 10 times and then is fine. Anyone know what might cause this??
I'm using:
MP 0.2.1.0
Windows XP Pro
Onboard Sound Asus P4P800SE

Thanks

 

[Spragleknas]

More infor would be nice... please fill out the template.

 

[cmccreery]

Template info

Sorry about that, not sure I know all the info though

Area: Media Portal Program
MediaPortal Version: 0.2.1.0 (2006-10-21)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: CyberLink Audio Decoder
Video Codec: ATI MPEG Video Decoder
CPU Type: Intel Pentium 4 - 2.80GHz
Memory: 1 GB
Motherboard: P4P800SE (ASUSTeK Computer Inc.)
TV Card Model: ATI AIW 9600 PRO Analogue
TV Card Type: -
TV Card Driver: ATI Media Centre 9.13
Video Card Model: All-in-wonder 9600 Series (128 MB)
Video Card Driver: -
Video Card Resolution: 1280x1024
Video Render Type: -
Audio Card Model: SoundMAX Integrated Digital Audio
Audio Card Driver: -
Synopsis:: -

 

[Spragleknas]

No problem - and welcome, btw!

Give this a try:
Audio codec: MPA
Video codec: MPV
Audiorenderer: Default directsound

MPA/MPV-codecs are bundled with MP (hence the name ).

Also, try enabeling timeshifting.


Good luck!

 

[cmccreery]

So closes

Almost, now the screen is black for those 10 seconds and then the show appears. Anything else cause I have no clue really.

 

[cmccreery]

Other issue

Ok I am outputting a digital coax, and when I listen to the MP on my headphones on regular headphone jack from the sound card, I get an overlay of the same audio channel. But if I just listen to digital out it sounds fine.

 

[SciDoctor]

This is a known problem with the AIW T200 driver.

The audio lock and sync to video is very poor on channel change and can take up to ten seconds of clicking noises, audio pulese and no video.

If you are using the T200 driver then don't have the audio passthrough cable connected on the AIW to the souncard input this can be the cause of the echo you hear on the sound.

 

[cmccreery]

Sound

The channel change is actually working fine when I just use the digital coax, but if I try to listen to the audio thru the soundcard then I get the echo. I guess there's not much I can do to fix that excpet listen to the audio from the digital coax

 

[n00n3]

hello,
i'm a n00b on mediaportal (being more expertised on mce 2005 but i thought the effort didn't matched the freedoms, so here i am )

i have an aiw with sound synch bad problems (about 3-4 secs before the video stream) still present with mpa\mpv\default config
my template is the following: - and gods do bless Zyphrax!

Area: Media Portal Program
MediaPortal Version: 0.2.1.0 (2006-10-21)
MediaPortal Skin: BlueTwo wide
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: NVIDIA Audio Decoder
Video Codec: NVIDIA Video Decoder
CPU Type: Intel Pentium 4 - 2.80GHz
Memory: 1 GB
Motherboard: SiS-651
TV Card Model: Radeon AIW 9800 256mb
TV Card Type: Hardware
TV Card Driver: -
Video Card Model: All-in-wonder 9800 Series (128 MB)
Video Card Driver: -
Video Card Resolution: 800x600
Video Render Type: -
Audio Card Model: C-Media AC97 Audio Device
Audio Card Driver: -
Synopsis::

audio from FTA trough AIW is out of sync with own videostream of -2 sec. if audio jack from FTA is plugged in line in echo appears


please help because with mce 2005 and very same setup (install on xp mce) this doesn't occurs, and it IS depressing