Netherlands
Windows Version: XP SP2
CPU Type: AMD Athlon 64 3000
Memory: 512MB
Motherboard: Asus K8n
Motherboard Chipset: nvidia nforce3 250
Motherboard Bios: AMI
Video Card: Asus Radeon 9250
Video Card Driver: Catalyst 8.241.0.0
Sound Card: Realtek ALC 850
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV Cable, priority 2
1. TV Card Type: Digital
1. TV Card Driver: 4.2.0 BDA, firmware 20-mar-2006 Beta
2. TV Card: Hauppauge WinTV PVR 150 PCI, priority 1
2. TV Card Type: Analog
2. TV Card Driver: 2.0.43.24103
Video Codec: Dscaler
Audio Codec: Intervideo Windvd
Satelite/CableTV Provider: Multikabel
HTPC Case: Silverstone LC10-M Lascala
Power Supply: Tagan
Remote: Hauppaug silver 45 button
TV:
TV - HTPC Connection: VGA to RGB Scart
Error description:
When I tune in to a channel which has a non-standard channelnr (i.e. 10402), MP ignores the frequency setting.
Steps to reproduce:
1) Use the SQLlite database browser to modify the "iChannelnr" field in the Channel table to a value which does not resemble an ordinary channel number.
2) Quit SQLlite db browser, and start MP
3) Enter My TV and try to tune in to the just modified channel.
4) No channel change, although MP thinks it has switched channels.
Additional comment: Why on earth would I try to modify the channelsettings via SQLite Db browser? Because it mimics default MP behaviour (reported as a bug in this thread: http://www.testteam-mediaportal.com/Joomla/forum/showthread.php?t=608).
I have a configuration where most channels are available in DVB-C as well as analog. When autotuning the DVB channels, the iChannelNr field is overwritten.
I Guess the solution is to ignore the channelnr and only use the frequency setting .
CPU Type: AMD Athlon 64 3000
Memory: 512MB
Motherboard: Asus K8n
Motherboard Chipset: nvidia nforce3 250
Motherboard Bios: AMI
Video Card: Asus Radeon 9250
Video Card Driver: Catalyst 8.241.0.0
Sound Card: Realtek ALC 850
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV Cable, priority 2
1. TV Card Type: Digital
1. TV Card Driver: 4.2.0 BDA, firmware 20-mar-2006 Beta
2. TV Card: Hauppauge WinTV PVR 150 PCI, priority 1
2. TV Card Type: Analog
2. TV Card Driver: 2.0.43.24103
Video Codec: Dscaler
Audio Codec: Intervideo Windvd
Satelite/CableTV Provider: Multikabel
HTPC Case: Silverstone LC10-M Lascala
Power Supply: Tagan
Remote: Hauppaug silver 45 button
TV:
TV - HTPC Connection: VGA to RGB Scart
Error description:
When I tune in to a channel which has a non-standard channelnr (i.e. 10402), MP ignores the frequency setting.
Steps to reproduce:
1) Use the SQLlite database browser to modify the "iChannelnr" field in the Channel table to a value which does not resemble an ordinary channel number.
2) Quit SQLlite db browser, and start MP
3) Enter My TV and try to tune in to the just modified channel.
4) No channel change, although MP thinks it has switched channels.
Additional comment: Why on earth would I try to modify the channelsettings via SQLite Db browser? Because it mimics default MP behaviour (reported as a bug in this thread: http://www.testteam-mediaportal.com/Joomla/forum/showthread.php?t=608).
I have a configuration where most channels are available in DVB-C as well as analog. When autotuning the DVB channels, the iChannelNr field is overwritten.
I Guess the solution is to ignore the channelnr and only use the frequency setting .