Reply to thread

Message

<blockquote data-quote="Kimmeridgien" data-source="post: 1029407" data-attributes="member: 60361">Hi,This is a continuation of the following thread, with a few differences:<a href="https://forum.team-mediaportal.com/threads/hauppauge-hvr-1300-analogue-and-fm-problems.120755/#post-1025984" target="_blank">https://forum.team-mediaportal.com/threads/hauppauge-hvr-1300-analogue-and-fm-problems.120755/#post-1025984</a>I have sold the Hauppauge card and changed to a ComPro VideoMate E900F for analog TV. I still have exactly the same problem when trying to schedule an analog TV recording: The first few times after installing a new card, analog scheduling works as it should. Then (for no apparent reason), the scheduled recordings simply vanish immediately.This post contains 2 new pieces of information: 1. I have found a workaround: If you manually select an analog channel and &quot;Record now&quot;, analog TV scheduling works as it should. After completing the scheduling, you can terminate the manual recording.2. As I have tried 3 or 4 different Hauppauge cards and 1 ComPro card with different HW, this isn't related to specific HW.(Win XP SP3 32-bit 4GB and Win7 Home Pro 64-bit 8GB share the problem. It has been the same through all MP versions I have used for the last 3+ years.)I haven't had time to set up VS2010 to debug. The logs are in my previous post.Kind regardsNiclas</blockquote>

[QUOTE="Kimmeridgien, post: 1029407, member: 60361"] Hi, This is a continuation of the following thread, with a few differences: [url]https://forum.team-mediaportal.com/threads/hauppauge-hvr-1300-analogue-and-fm-problems.120755/#post-1025984[/url] I have sold the Hauppauge card and changed to a ComPro VideoMate E900F for analog TV. I still have exactly the same problem when trying to schedule an analog TV recording: The first few times after installing a new card, analog scheduling works as it should. Then (for no apparent reason), the scheduled recordings simply vanish immediately. This post contains 2 new pieces of information: 1. I have found a workaround: If you manually select an analog channel and "Record now", analog TV scheduling works as it should. After completing the scheduling, you can terminate the manual recording. 2. As I have tried 3 or 4 different Hauppauge cards and 1 ComPro card with different HW, this isn't related to specific HW. (Win XP SP3 32-bit 4GB and Win7 Home Pro 64-bit 8GB share the problem. It has been the same through all MP versions I have used for the last 3+ years.) I haven't had time to set up VS2010 to debug. The logs are in my previous post. Kind regards Niclas [/QUOTE]

Verification