Reply to thread

Message

<blockquote data-quote="Rick164" data-source="post: 1120894" data-attributes="member: 17766">Don't use an splitter at the moment, the AVR supports 2 HDMI outs but used these ones for testing as well with the same results:<a href="http://lightberry.eu/shop/shop/hdmi-premium-kit/" target="_blank">http://lightberry.eu/shop/shop/hdmi-premium-kit/</a><a href="https://www.conrad.nl/nl/2-poorten-hdmi-splitter-ultra-hd-geschikt-3d-weergave-mogelijk-3840-x-2160-pix-speaka-professional-zwart-419154.html" target="_blank">https://www.conrad.nl/nl/2-poorten-hdmi-splitter-ultra-hd-geschikt-3d-weergave-mogelijk-3840-x-2160-pix-speaka-professional-zwart-419154.html</a>Can output 2x 24hz with the AVR so long as both output devices support it, once I connect the composite converter however it gets limited to 50/60hz because you can't split signals at different refresh rates.Both NTSC and PAL don't support 24hz, 24P is really an universal standard which is not supported by analog signals (composite).Even when splitting the HTPC/BD/STB needs to take all output devices into account, it will choose an refresh rate and resolution that is supported on all outputs as otherwise it wouldn't work.On a few german boards they discuss the same issue with the live capture and so far no workaround has been found.</blockquote>

[QUOTE="Rick164, post: 1120894, member: 17766"] Don't use an splitter at the moment, the AVR supports 2 HDMI outs but used these ones for testing as well with the same results: [url]http://lightberry.eu/shop/shop/hdmi-premium-kit/[/url] [url]https://www.conrad.nl/nl/2-poorten-hdmi-splitter-ultra-hd-geschikt-3d-weergave-mogelijk-3840-x-2160-pix-speaka-professional-zwart-419154.html[/url] Can output 2x 24hz with the AVR so long as both output devices support it, once I connect the composite converter however it gets limited to 50/60hz because you can't split signals at different refresh rates. Both NTSC and PAL don't support 24hz, 24P is really an universal standard which is not supported by analog signals (composite). Even when splitting the HTPC/BD/STB needs to take all output devices into account, it will choose an refresh rate and resolution that is supported on all outputs as otherwise it wouldn't work. On a few german boards they discuss the same issue with the live capture and so far no workaround has been found. [/QUOTE]

Verification