Reply to thread

Message

<blockquote data-quote="TheBatfink" data-source="post: 1196116" data-attributes="member: 52265">Hi Rick, would appreciate any advice you could share <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />So I finally got around to wiping my rPi and putting Raspbian Jessie on it. All gone well, Hyperion installed, config loaded. I can connect with Hyperion iOS app and control the lights with it via the rPi so figuring my hyperion config is half working at least and it's connecting to the arduino OK. I can also control lights using the live update in the Hyperion config tool OK.But I still have problems. I have IP configured in Atmolight plugin 192.168.1.247 (same IP I set as static in Raspbian and the iOS ap). I see the following behaviour:- Load MePo- Start Media Playback- Immediately I see the booteffect I setup in Hyperion- No lights on at all- Approx 10 seconds after the booteffect I see the booteffect again- No lights on at allThis seems to just cycle on and on. Lights never work except for cycling the booteffect. I'm guessing MePo/Atmolight is causing it as when I close MePo the cycling stops (although simply stopping play back does not stop it has to be quit MePo).In my Mediaportal Error log I see many entries like this:[code][2016-09-18 10:06:24,418] [Error&nbsp; ] [38&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Error while sending proto request[2016-09-18 10:06:24,428] [Error&nbsp; ] [38&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Exception: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host.[2016-09-18 10:06:26,690] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string[2016-09-18 10:06:26,701] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array.[2016-09-18 10:06:28,963] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string[2016-09-18 10:06:28,979] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array.[2016-09-18 10:06:39,103] [Error&nbsp; ] [38&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Error while sending proto request[2016-09-18 10:06:39,115] [Error&nbsp; ] [38&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Exception: Unable to write data to the transport connection: An established connection was aborted by the software in your host machine.[2016-09-18 10:06:41,378] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string[2016-09-18 10:06:41,403] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array.[2016-09-18 10:06:43,674] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string[2016-09-18 10:06:43,686] [Error&nbsp; ] [64&nbsp; &nbsp; &nbsp;&nbsp; ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array.[/code]I checked my machines connectivity to the rPi and it seems OK:[ATTACH]182265[/ATTACH]Any ideas??ThanksEDIT: Added my hyperion config and some shots of my Atmolight setup:[ATTACH]182269[/ATTACH] [ATTACH]182268[/ATTACH]I also noticed I had internal grabber activates but didn't need it so I disabled. But still same behaviour.EDIT 2: Added Hyperion log file.. It looks like Hyperion is crashing?</blockquote>

[QUOTE="TheBatfink, post: 1196116, member: 52265"] Hi Rick, would appreciate any advice you could share :) So I finally got around to wiping my rPi and putting Raspbian Jessie on it. All gone well, Hyperion installed, config loaded. I can connect with Hyperion iOS app and control the lights with it via the rPi so figuring my hyperion config is half working at least and it's connecting to the arduino OK. I can also control lights using the live update in the Hyperion config tool OK. But I still have problems. I have IP configured in Atmolight plugin 192.168.1.247 (same IP I set as static in Raspbian and the iOS ap). I see the following behaviour: - Load MePo - Start Media Playback - Immediately I see the booteffect I setup in Hyperion - No lights on at all - Approx 10 seconds after the booteffect I see the booteffect again - No lights on at all This seems to just cycle on and on. Lights never work except for cycling the booteffect. I'm guessing MePo/Atmolight is causing it as when I close MePo the cycling stops (although simply stopping play back does not stop it has to be quit MePo). In my Mediaportal Error log I see many entries like this: [code][2016-09-18 10:06:24,418] [Error ] [38 ] [ERROR] - AtmoLight: HyperionHandler - Error while sending proto request [2016-09-18 10:06:24,428] [Error ] [38 ] [ERROR] - AtmoLight: HyperionHandler - Exception: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. [2016-09-18 10:06:26,690] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string [2016-09-18 10:06:26,701] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array. [2016-09-18 10:06:28,963] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string [2016-09-18 10:06:28,979] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array. [2016-09-18 10:06:39,103] [Error ] [38 ] [ERROR] - AtmoLight: HyperionHandler - Error while sending proto request [2016-09-18 10:06:39,115] [Error ] [38 ] [ERROR] - AtmoLight: HyperionHandler - Exception: Unable to write data to the transport connection: An established connection was aborted by the software in your host machine. [2016-09-18 10:06:41,378] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string [2016-09-18 10:06:41,403] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array. [2016-09-18 10:06:43,674] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Error while checking IP for hostname string [2016-09-18 10:06:43,686] [Error ] [64 ] [ERROR] - AtmoLight: HyperionHandler - Exception: Index was outside the bounds of the array.[/code] I checked my machines connectivity to the rPi and it seems OK: [ATTACH]182265[/ATTACH] Any ideas?? Thanks EDIT: Added my hyperion config and some shots of my Atmolight setup: [ATTACH]182269[/ATTACH] [ATTACH]182268[/ATTACH] I also noticed I had internal grabber activates but didn't need it so I disabled. But still same behaviour. EDIT 2: Added Hyperion log file.. It looks like Hyperion is crashing? [/QUOTE]

Verification