back to back recordings with post recording problem (1 Viewer)

[mrfg]

MP 1.1.13, Windows 7, Analog cable, Hauppauge 2200, K-Lite Codec Pack 7.8 with default config.

I have scheduled channel XYZ like :
12:00 - 13:00 (+ 1 minute post recording)
13:00 - 14:00 (+ 1 minute post recording)
14:00 - 15:00 (+ 1 minute post recording) ... etc.

and then almost (99%) every recordings have blue screen with 5-20 seconds length when next schedule begins. ~ 12:59:56 - 13:00:03 <---- blue screen.

Sample file : http://tushee.mn/tmp/btv_20_59_49_-_21_00_32.avi -> orignal recording time is : 20:00 - 21:01 and blue screen : ~20:59:55 -> 20:59:59

Can you fix it?
Or am I doing something wrong?

 

[mm1352000]

Hi mrfg

This is probably caused by interference generated when the other tuner on the card starts to tune. You should make sure you're using the most up-to-date driver from Hauppauge. If that doesn't fix it then you could try a different splitter or increasing/decreasing signal strength. Other than that, there is probably nothing you can do. There is *definitely* nothing that we can do - this is a hardware or driver problem.

mm

 

[tourettes]

I had similar issue with a DVB card whose manufacturer I cannot remember. It was corrupting the DVB-C signal to the other card when ever it was used.

 

[mm1352000]

Setting to "no bug" - this is not a MediaPortal or TV Server issue.