Blu-Ray / HD DVD plugin for Arcsoft player (22 Viewers)

[some1]

well strange that it works fine in windows when I start a bluray movie with the arcsoft player my reciever switches to Digital 5.1.
but in MP I get only stereo.
this plugin only lauches arcsoft player and switches back to MP when I close it right? cuz I cant seem to find any codec settings etc for it.

 

[tourettes]

well strange that it works fine in windows when I start a bluray movie with the arcsoft player my reciever switches to Digital 5.1.

They are two different player applications and there has been some other bugs as well with the MCE player / plugin. So, I would first check Arcsoft's own forums and try to find some similar issues with MCE.

 

[some1]

thanks for the fast replies

problem fixed!
I had to right click on screen when I'd launched the player in MP and adjust settings there
that wasnt needed with powerdvd wich I used before hehe.

thanks alot for this great plugin!

 

[markrb]

With the first release candidate due this week of 1.1 does anyone know if this plug-in will work with it?

I am having issues with my MP setup and plan to do a full re-install. I might as well wait and try the RC, but this plug-in is important to me.

Thanks,
Mark

 

[roosterx]

Anyone who can tell me if the MCE remote does work, like start, stop etc?

Last time i tested it i couldn't get my OrigenAE S14V remote to work..

 

[Imokles]

Last time i tested it i couldn't get my OrigenAE S14V remote to work..

You need to manually edit a config file. See this FAQ entry for details:
best10 > PRODUCT > How to make IRTrans work with TotalMedia Theatre

Additionally, enable IR Trans in the "Remote" section of MP config and be sure to read this if you get double key presses:
http://wiki.team-mediaportal.com/Me...show&redirect=MediaPortalSetup_Remote/IRTrans

 

[AgeOfPanic]

Actually, in order for your IRTrans remote to work in TMT, you need the section that you delete to prevent the double key presses. I found a workaround. Make sure that you follow the instructions given by OrigenAE to enable TMT, but paste the commands that you delete to avoid the double key presses under them. Confusing, but this is how will look like in your apps.cfg:
BTW I use an OrigenAE S10V case.

[APP]TMT
[ACTIVE]
[CLASSNAME]TotalMedia2FDVDPlayerFrame
[REMOTE]mediacenter
[COMMANDS]
PLAY [APP]APPCOMMAND_MEDIA_PLAY
PAUSE [APP]APPCOMMAND_MEDIA_PAUSE
STOP [APP]APPCOMMAND_MEDIA_STOP
NEXT [APP]APPCOMMAND_MEDIA_NEXTTRACK
PREV [APP]APPCOMMAND_MEDIA_PREVIOUSTRACK
VOL- [APP]APPCOMMAND_VOLUME_DOWN
VOL+ [APP]APPCOMMAND_VOLUME_UP
MUTE [APP]APPCOMMAND_VOLUME_MUTE
REW [APP]APPCOMMAND_MEDIA_REWIND
FWD [APP]APPCOMMAND_MEDIA_FAST_FORWARD
1           [KEY]1
2           [KEY]2[KEY]a[KEY]b[KEY]c
3           [KEY]3[KEY]d[KEY]e[KEY]f
4           [KEY]4[KEY]g[KEY]h[KEY]i
5           [KEY]5[KEY]j[KEY]k[KEY]l
6           [KEY]6[KEY]m[KEY]n[KEY]o
7           [KEY]7[KEY]p[KEY]q[KEY]r[KEY]s
8           [KEY]8[KEY]t[KEY]u[KEY]v
9           [KEY]9[KEY]w[KEY]x[KEY]y[KEY]z
0           [KEY]0[KEY]\SPACE
OK          [KEY]\ENTER
ENTER       [KEY]\ENTER
LEFT        [KEY]\LEFT
RIGHT       [KEY]\RIGHT
DOWN        [KEY]\DOWN
UP          [KEY]\UP
BACK        [KEY]\BACKSPACE
[END-COMMANDS]
[END-APP]

and

[APP]TMT10ft
[ACTIVE]
[CLASSNAME]MCEPlayerMainFrame
[REMOTE]mediacenter
[COMMANDS]
PLAY [APP]APPCOMMAND_MEDIA_PLAY
PAUSE [APP]APPCOMMAND_MEDIA_PAUSE
STOP [APP]APPCOMMAND_MEDIA_STOP
NEXT [APP]APPCOMMAND_MEDIA_NEXTTRACK
PREV [APP]APPCOMMAND_MEDIA_PREVIOUSTRACK
VOL- [APP]APPCOMMAND_VOLUME_DOWN
VOL+ [APP]APPCOMMAND_VOLUME_UP
MUTE [APP]APPCOMMAND_VOLUME_MUTE
REW [APP]APPCOMMAND_MEDIA_REWIND
FWD [APP]APPCOMMAND_MEDIA_FAST_FORWARD
1           [KEY]1
2           [KEY]2[KEY]a[KEY]b[KEY]c
3           [KEY]3[KEY]d[KEY]e[KEY]f
4           [KEY]4[KEY]g[KEY]h[KEY]i
5           [KEY]5[KEY]j[KEY]k[KEY]l
6           [KEY]6[KEY]m[KEY]n[KEY]o
7           [KEY]7[KEY]p[KEY]q[KEY]r[KEY]s
8           [KEY]8[KEY]t[KEY]u[KEY]v
9           [KEY]9[KEY]w[KEY]x[KEY]y[KEY]z
0           [KEY]0[KEY]\SPACE
OK          [KEY]\ENTER
ENTER       [KEY]\ENTER
LEFT        [KEY]\LEFT
RIGHT       [KEY]\RIGHT
DOWN        [KEY]\DOWN
UP          [KEY]\UP
BACK        [KEY]\BACKSPACE
[END-COMMANDS]
[END-APP]

With this addition all your buttons will work.

Edit I just realised that I used a lot of words just to say that you should copy the code above to your apps.cfg in the c:\program files\irtrans\remotes folder.

 

[roosterx]

imokles: Thank you, it did work.

AgeofPanic: Thanks to you too! Do you know how i exit TMT and return to MP?

I am at work so can't test right now if your extra settings does it for me..

 

[Imokles]

imokles: Thank you, it did work.

AgeofPanic: Thanks to you too! Do you know how i exit TMT and return to MP?

I am at work so can't test right now if your extra settings does it for me..

You can exit TMT by mapping a key to it. From memory (I am also at work) that key is CTRL+X for TMT. I mapped this to the "Green Button" by including

EHOME [KEY]\CTRLX

in apps.cfg.
You can use this method to map additional keys (e.g. switches to disc menu). There is a keyboard shortcut list in the TMT online help.

 

[AgeOfPanic]

If you copy the code I have posted above, the back button will take you back to MediaPortal.