TV-Server Version: 1.0 RC3 SVN 20755
MediaPortal Version: 1.0 RC3 20755
MediaPortal Skin: Black & White 1080
Windows Version: XP Pro SP3
CPU Type: AMD BE 2400
HDD: Western Digital 500GB
Memory: 2x MTD 1GB RAM
Motherboard: Gigabyte MA78GM-S2H 1.0
Video Card: HD 3200 Onboard
Video Card Driver: Catalyst 8.11
Sound Card: Realtek HD Audio onboard
Sound Card AC3: no AC3
Sound Card Driver: newest
1. TV Card: Technotrend Budget S2-3200
1. TV Card Type: DVB-S2
1. TV Card Driver: 5.0.0.19
2. TV Card: Technotrend Budget C-1501
2. TV Card Type: DVB-C
2. TV Card Driver: 5.0.0.19
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD 8
MPEG2 Audio Codec: MPA
h.264 Video Codec: Cyberlink PowerDVD 8
Satelite/CableTV Provider: Astra 19.2, Hotbird 13.0, KabelBW Germany
HTPC Case:
Cooling:
Power Supply:
Remote: Microsoft Media Center v2
TV: Samsung LE37M86
TV - HTPC Connection: DVI
Hi,
I have this problem since started using MP (started with RC1). I have SAT (Astra 19.2) and Cable (KabelBW Germany). Most channles are similar (ARD, ZDF, ...) but some are only available on SAT or Cable so I use this mix.
The problem is:
Whichever Card has the higher priority in TV-Server works properly, the one with lower one doesnt if the other card has been used once. In my case Sat is higher priority. So I can tune all SAT-channels without problems, but cant switch to Cable. If I give a higher priority to Cable its the other way around. The error message isnt conclusive either sometimes its "Unknown error" and sometimes "No signal". I do not have this problems using DVBViewer.
Hope somebody can help me
MediaPortal Version: 1.0 RC3 20755
MediaPortal Skin: Black & White 1080
Windows Version: XP Pro SP3
CPU Type: AMD BE 2400
HDD: Western Digital 500GB
Memory: 2x MTD 1GB RAM
Motherboard: Gigabyte MA78GM-S2H 1.0
Video Card: HD 3200 Onboard
Video Card Driver: Catalyst 8.11
Sound Card: Realtek HD Audio onboard
Sound Card AC3: no AC3
Sound Card Driver: newest
1. TV Card: Technotrend Budget S2-3200
1. TV Card Type: DVB-S2
1. TV Card Driver: 5.0.0.19
2. TV Card: Technotrend Budget C-1501
2. TV Card Type: DVB-C
2. TV Card Driver: 5.0.0.19
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD 8
MPEG2 Audio Codec: MPA
h.264 Video Codec: Cyberlink PowerDVD 8
Satelite/CableTV Provider: Astra 19.2, Hotbird 13.0, KabelBW Germany
HTPC Case:
Cooling:
Power Supply:
Remote: Microsoft Media Center v2
TV: Samsung LE37M86
TV - HTPC Connection: DVI
Hi,
I have this problem since started using MP (started with RC1). I have SAT (Astra 19.2) and Cable (KabelBW Germany). Most channles are similar (ARD, ZDF, ...) but some are only available on SAT or Cable so I use this mix.
The problem is:
Whichever Card has the higher priority in TV-Server works properly, the one with lower one doesnt if the other card has been used once. In my case Sat is higher priority. So I can tune all SAT-channels without problems, but cant switch to Cable. If I give a higher priority to Cable its the other way around. The error message isnt conclusive either sometimes its "Unknown error" and sometimes "No signal". I do not have this problems using DVBViewer.
Hope somebody can help me