I have two TV-Cards and even tho there is no recordings and all channels are green in channel list, I get an error saying cannot start time-shifting. I don't think i have ever solved this problem so the time is now.
Client not able view channel on different Trasnponder (1 Viewer)
- Thread starter Quarter
- Start date
- Thread starter
- #3
Lol I forgot to put them in. I'll kick everyone off the the main htpc and get them to you[DOUBLEPOST=1390194053][/DOUBLEPOST]New logs uploaded
Last edited:
- September 1, 2008
- 21,577
- 8,224
- Home Country
-
New Zealand
So this was happening at around 17:30 today, right?
From what I can see, your Media-PC was tuned to FOUR:
Then somebody started trying to view TVNZ channels with Client-PC at around 17:30:
With the first tuner occupied, TV Server attempted to use the second tuner... however it failed to lock on signal. I suspect that the reason for that is your tuning details for the TVNZ channels appear to be off:
Check Optus D1 on Lyngsat:
http://www.lyngsat.com/Optus-D1.html
...and you'll see that the TVNZ transponder should be:
frequency = 12483000 kHz
symbol rate = 22500 ks/s
modulation = not set (QPSK)
polarisation = horizontal
FEC rate = 3/4
If I were you I'd rescan that transponder with a single transponder scan.
mm
From what I can see, your Media-PC was tuned to FOUR:
Then somebody started trying to view TVNZ channels with Client-PC at around 17:30:
With the first tuner occupied, TV Server attempted to use the second tuner... however it failed to lock on signal. I suspect that the reason for that is your tuning details for the TVNZ channels appear to be off:
[2014-01-20 17:31:19,167] [Log ] [19 ] [INFO ] - dvbs: TuneVBS:tv:TVNZ TV2 Freq:12478000 ONID:47 TSID:22 SID:1036 PMT:0x10E FTA:True LCN:10000 SymbolRate:27800 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate3_4 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
Check Optus D1 on Lyngsat:
http://www.lyngsat.com/Optus-D1.html
...and you'll see that the TVNZ transponder should be:
frequency = 12483000 kHz
symbol rate = 22500 ks/s
modulation = not set (QPSK)
polarisation = horizontal
FEC rate = 3/4
If I were you I'd rescan that transponder with a single transponder scan.
mm
- Thread starter
- #5
You are smack on. Thanks i will try that
- Thread starter
- #6
Well I found a few that were wrong. All fixed now And no issues, thank you!
- September 1, 2008
- 21,577
- 8,224
- Home Country
-
New Zealand