codec recommendations (no sound on some ATSC channels) (1 Viewer)

asbo

New Member
January 25, 2006
1
0
Toronto, Canada
Area: Media Portal Program (My TV)
MediaPortal Version: MediaPortal 0.2 RC2
MediaPortal Skin: Blue Two
Windows Version: Windows XP - SP2
.NET CLR Version: 2.0 / 1.1
DirectX Version: (9.0c)
Audio Codec: Cyberlink Audio Decoder
Video Codec: DScaler MPEG2 Video decoder
CPU Type: Intel P4 3.0 Ghz
Memory: 1Gb
Motherboard: ?? - Dell (Intel 915 chipset)
TV Card Model: ATI HDTV Wonder
TV Card Type: Hardware
Video Card Model: ATI Radeon X300 (PCIe)
Video Card Driver: ATI version 6.14.10.6451
Video Card Resolution: 1024 x 768
Video Render Type: VMR9
Audio Card Model: Soundmax Onboard
Audio Card Driver: Analog Devices version 5.12.1.4060
Synopsis:

On some channels I get no sound or choppy sound.
When switcing to these channels I hear the sound for a fraction of a second but then it all goes silent.
Video is fine.
Can anyone recommend a good combination of video and audio codecs?

Note to the developers / testers: this is a wonderful program. Keep up the good work! :?:
 

Users who are viewing this thread

Similar threads

Many people found the Lentoid decoder better optimised than LAV for software decoding. If you want to try it, download it from the link below, run reg.bat as an admin to install it and change the HEVC Video settings in MediaPortal Configuration/Codecs and Renderer...
Many people found the Lentoid decoder better optimised than LAV for software decoding. If you want to try it, download it from the...
For some unknown reason I can't play HEVC encoded video with MP1 on my system. I have tried every trick I know, but nothing works...
Replies
10
Views
686
Sorry for the late response. In my experience, the EPG grabbing of a single transponder takes 2 to 3 minutes. Afterwards it takes 1 to 2 minutes to write the data to disk. To speed up the EPG stuff (not only writing but also reading the EPG guide in MediaPortal), I changed the program table (and only that table) from InnoDB to...
Sorry for the late response. In my experience, the EPG grabbing of a single transponder takes 2 to 3 minutes. Afterwards it takes...
I get a few "Continuity error..." after the EPG scan finished: [2021-01-30 18:56:10,278] [4c45530] [18c8] - mhw reset [2021-01-30...
Replies
2
Views
1K
Ok I could solve my problem by myself. The logs said that the delimiter of that song is not in text form. Although it was already in text form and I deleted the music database, the title information was still not available. I ripped the song again and now it works. I think that something went wrong the first time.
Ok I could solve my problem by myself. The logs said that the delimiter of that song is not in text form. Although it was already...
Hi, After the update from 1.25 to 1.26 the replay gain functionality appears to be broken. I had no sound on all audio files (TV...
Replies
12
Views
1K
MP1 MP2 Migrating from WMC DE
Hi. Network tuners can be shared even on the same PC (done it often while testing different software, I'm using SAT>IP tuner that are similar to hdhomerun tuner but for European DVB). But you can not use them on both systems at the same time ofc.. Means if WMC is using a tuner (e,g, for a scheduled recording) MP can't use the same...
Hi. Network tuners can be shared even on the same PC (done it often while testing different software, I'm using SAT>IP tuner that...
I have been running Windows Media Centre happily for years on Win 7 Pro, more recently with EPG123 as an intermediary providing...
Replies
43
Views
3K
Updated with the guide to install an Intel HDMI audio Device that can stream 192kHz/24bit. If you have any question, feel free to reply here.
Updated with the guide to install an Intel HDMI audio Device that can stream 192kHz/24bit. If you have any question, feel free to...
I switched to MePo 2 with the release of MePo 2.1.1, and in the last months I focused on learning the program and fine tuning it...
Replies
8
Views
2K
Top Bottom