Config database error (1 Viewer)

[bachmand]

15-05-2006 20:53:32 use unique filter monikerdevicenp:\\?\stream#hcw88bar.cfgox#5&2598612b&1&0#{a799a801-a46d-11d0-a18c-00a02401dcd4}\global
15-05-2006 20:53:32 Found Hauppauge WinTV 88x Crossbar=@devicenp:\\?\stream#hcw88bar.cfgox#5&2598612b&1&0#{a799a801-a46d-11d0-a18c-00a02401dcd4}\global
15-05-2006 20:53:32 filter capture='Hauppauge WinTV 88x Video Capture' check:True
15-05-2006 20:53:32 filter encoder='Hauppauge WinTV 88x MPEG Encoder' check:True
15-05-2006 20:53:32 CheckDevicedevicenp:\\?\pci#ven_14f1&dev_8802&subsys_96010070&rev_05#4&2b17f62e&0&4280
15-05-2006 20:53:32 FindUniqueFilter:card#0 filterdevicenp:\\?\pci#ven_14f1&dev_8802&subsys_96010070&rev_05#4&2b17f62e&0&4280
15-05-2006 20:53:32 keyYSTEM\CurrentControlSet\Enum\pci\ven_14f1&dev_8802&subsys_96010070&rev_05\4&2b17f62e&0&4280
15-05-2006 20:53:32 serviceName:HCW88TSE
15-05-2006 20:53:32 keyYSTEM\CurrentControlSet\Services\HCW88TSE\Enum
15-05-2006 20:53:32 filters available:1
15-05-2006 20:53:32 filter#:0=PCI#VEN_14F1&DEV_8802&SUBSYS_96010070&REV_05#4&2b17f62e&0&4280
15-05-2006 20:53:32 using filter #:0=PCI#VEN_14F1&DEV_8802&SUBSYS_96010070&REV_05#4&2b17f62e&0&4280
15-05-2006 20:53:32 use unique filter monikerdevicenp:\\?\pci#ven_14f1&dev_8802&subsys_96010070&rev_05#4&2b17f62e&0&4280#{19689bf6-c384-48fd-ad51-90e58c79f70b}\{1c10193d-7dca-4f55-99d8-00a0c9f21fc7}
15-05-2006 20:53:32 Found Hauppauge WinTV 88x MPEG Encoder=@devicenp:\\?\pci#ven_14f1&dev_8802&subsys_96010070&rev_05#4&2b17f62e&0&4280#{19689bf6-c384-48fd-ad51-90e58c79f70b}\{1c10193d-7dca-4f55-99d8-00a0c9f21fc7}
15-05-2006 20:53:32 found 2 tv cards
15-05-2006 20:53:32 Digital DVB-T Card:Hauppauge HVR-1300 Digital
15-05-2006 20:53:32 Analog TV Card:Hauppauge HVR-1300 Analogue
15-05-2006 20:53:32 start application
15-05-2006 20:53:32 HCW: Could not find registry entries for driver components! (Not installed?)
15-05-2006 20:53:32 HCW: Could not find registry entries for driver components! (Not installed?)
15-05-2006 20:53:34 opening tvdatabase
15-05-2006 20:53:35 TVDatabase exception err:Typeinitialiseringsfunktionen for 'SQLite.NET.SQLiteClient' udløste en undtagelse. stack: ved SQLite.NET.SQLiteClient..ctor(String dbName)
ved MediaPortal.TV.Database.TVDatabase.Open()
15-05-2006 20:53:35 tvdatabase opened


Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: -
Video Codec: -
CPU Type: AMD Sempron 3000+
Memory: 511 MB
Motherboard: K8NF4G-SATA2
TV Card Model: Hauppage HVR-1300
TV Card Type: Hardware
TV Card Driver: Newest
Video Card Model: Nvidia Geforce 6200 Turbocache(tm) (128 MB)
Video Card Driver: -
Video Card Resolution: 1024x768
Video Render Type: -
Audio Card Model: Realtek AC'97 Audio
Audio Card Driver: -
Synopsis::

Config program fails in either 3. or 4. screen. Scanning for mediafiles, or if that is skipped when scanning for tv-cards. The log indicates that database creation fails in both cases.

 

[Wbunaarf]

This seems to be this problem, doesn't it?

https://forum.team-mediaportal.com/viewtopic.php?t=14066&highlight=

You are using either a Danish or a Norweigan OS, aren't you?

//Johannes

 

[bachmand]

Yes, it is very simmilar, only I cannot ignore and carry on, XP wants to send a report to MS.

And yes I see the exact same symptom with the DB not being created.

And, finally, yes, it is a Danish version.

/bachmand

 

[Wbunaarf]

Yes, it is very simmilar, only I cannot ignore and carry on, XP wants to send a report to MS.

Can't you just drag the 'report to MS'-window away, finish the guide and then choose if you wish to report or not? If I remember corectly, that is what I did.

And, finally, yes, it is a Danish version.

I wonder what MP has against us Scandinavians...

//Johannes

 

[bachmand]

Yes, I can do that, and it will finish the guide, but no channel data is stored.

I can start the application, the weather is working, but no channels are available and no epg is there (prob. because there are no channels, the xml file is ok).

From within the app. I can go to the builtin config, it will also find the DVB-T channels without any problems, but as soon as it tries to store them, the app chrashes and I get the post a message to MS again.

/bachmand

 

[Wbunaarf]

Yes, I can do that, and it will finish the guide, but no channel data is stored.

Same here, but at least it allows the wizard to finish.

From within the app. I can go to the builtin config, it will also find the DVB-T channels without any problems, but as soon as it tries to store them, the app chrashes and I get the post a message to MS again.

Since I don't have a DVB card, I can't comment on that. Using analogue, however, once the wizard is completed I just start configuration.exe and database creation is working...

//Johannes

 

[bachmand]

Since I don't have a DVB card, I can't comment on that.

I think the DVB part is just where it starts, it would probably be the same if only had the analouge part.

Using analogue, however, once the wizard is completed I just start configuration.exe and database creation is working...

Hmmm. I will try that tonight, sounds promising.

Strange is it though, that I had it all running with RC3 together with a copy of GB-PVR. Because a lot of experimenting had cluttered the PC, I decided to do a fresh install, Windows, SP and everything, and after that I can't get any of MP or GB-PVR to work.

/bachmand

 

[bachmand]

You were absolutely right, it is working now. All I had to do was to start the config, and the database is created.

All I miss now is a clear understanding of the relationship between epg, channelsetup on the tv-card and what I see in the tv-guide in the program.

Also, my epg data seems to be an hour off, probably not a big problem.

Anyway thanks a million for the help, without it, I would have abandoned the program.

/bachmand

 

[ThomasGT]

Same problem for me but

I cant scan media or save channel scan. sqlite db support crashes and can't write/create new database.

This hapends on freshly installed XP home SP2.

Tried to reinstal but I get the same fault again.
/T