Configure My TV, prio input source issue (1 Viewer)

FlipGer

Retired Team Member
  • Premium Supporter
  • April 27, 2004
    2,658
    115
    48
    Leipzig, Germany
    Home Country
    Germany Germany
    Windows Version: Windows XP Home SP2
    CPU Type: AMD Athlon XP 1700+
    Memory: 1 GB noName
    Motherboard: EliteGroup
    Motherboard Chipset: VIA KT
    Motherboard Bios:
    Video Card: ATi Radeon 8500
    Video Card Driver: Catalyst 6.3
    Sound Card: Soundblaster Audigy 2 ZS
    Sound Card AC3: no AC3
    Sound Card Driver:
    1. TV Card: Hauppauge PVR 350
    1. TV Card Type: analog
    1. TV Card Driver: SHSPVR (1.18.21.23257)
    2. TV Card: Hauppauge PVR 150
    2. TV Card Type: analog
    2. TV Card Driver: SHSPVR (2.0.35.23258)
    Video Codec: DScaler
    Audio Codec: DScaler
    Satelite/CableTV Provider: Primacom
    HTPC Case:
    Power Supply:
    Remote: Haupauge (45 Button)
    TV: Standard TV
    TV - HTPC Connection: VGA - RGB

    Hi,

    ok. This is a nice one for users with analog multituner (PVR 500 and or several PVR 150 / 250 / 350). Changing the card priority effects the input source settings.

    Please follow these steps very carefully...

    - start Configure
    - goto Television->Capture Cards
    - edit your card1
    - set prio 3 and on the autotune page Input Source Cable
    - hit OK
    - edit your card2
    - set prio 3 and on the autotune page Input Source Cable
    - hit OK

    So far for the preparations. Now for the nice part. ;)

    - edit your card1
    - change the prio to 1 (do not look at the autotune page!)
    - hit OK

    - edit your card2
    - look at the autotune page: Inpute Source changed back to Antenna
    - hit Cancel

    - edit your card1
    - look at the autotune page: Inpute Source changed back to Antenna, too!
    - hit Cancel

    - edit your card2
    - change Inpute Source back to Cable
    - hit OK

    - edit your card1
    - look at the autotune page: Inpute Source changed also back to Cable!

    thats it...

    Flip
     

    imported_tein

    New Member
    February 12, 2006
    2
    0
    49
    Stockholm, Sweden
    Windows Version: Windows XP Pro SP2
    CPU Type: Intel Celeron D 330, 2,66GHz
    Memory: 1 x 1 GB
    Motherboard: ASRock P4VM800
    Motherboard Chipset: VIA P4M800 Pro
    Motherboard Bios: AMI (06/25/05)
    Video Card: NVIDIA GeForce FX 5200 (128 MB)
    Video Card Driver: 5.6.7.3
    Sound Card: VIA AC'97 Enhanced Audio Controller
    Sound Card AC3:
    Sound Card Driver: 5.12.1.46
    1. TV Card: Hauppauge WinTV PVR 150
    1. TV Card Type: Analog H/W
    1. TV Card Driver: 2.0.35.23348
    2. TV Card: ASUS MyCinema P7131 Dual
    2. TV Card Type: DVB-T and analog S/W
    2. TV Card Driver: 13.3.1.4
    Video Codec: Mpeg2Dec Filter
    Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
    Satelite/CableTV Provider: ComHem analog
    HTPC Case: Silverstone LC17 (silver)
    Power Supply:
    Remote: Hauppauge 45 bt
    TV:
    TV - HTPC Connection: S-Video out -> SCART (S-Video)


    I get exactly the same behaviour with svn-04-15-2006--10-22, using Hauppauge WinTV PVR 150 and the analog part of ASUS P7131 Dual.
     

    Users who are viewing this thread

    Top Bottom