- December 10, 2006
- 71
- 0
- Home Country
-
United Kingdom
I have built a HTPC, a couple of years ago,. It has a Hauppauge Nova 500 Satellite tuner card installed in a PCI expansion slot that works fine. I used to have a DVB-T tuner card installed on the PCI-E expansion slot but recently it started to play up a bit. I decided to buy the new dual Blackgold DVB-T2 DVB-S2 tuner card and plugged in the terrestriual cable but the picture quality was just as bad. I thought it was the aerial or booster that was at fault. I decided to have this checked out and, going the whole hog, have a second cable from a spare LNB on the satellite.
Well, guess what, the picture quality through the Blackgold satellite was poor as well. I therefore have to conclude that it is probably the PCI-E expansion slot that is at fault. The problem is, I don't know what to do about it. Is there a way to test that the slot is working ok or that the Blackgold tuner card is really at fault?
The aerial man checked the signals and all appear ok. I have installed the latest driver for the BlackGold. I notice from the logs that there are a huge number of Continuity Errors.
Any suggestions would be grately appreciated.
I attach some logs that might help.
Well, guess what, the picture quality through the Blackgold satellite was poor as well. I therefore have to conclude that it is probably the PCI-E expansion slot that is at fault. The problem is, I don't know what to do about it. Is there a way to test that the slot is working ok or that the Blackgold tuner card is really at fault?
The aerial man checked the signals and all appear ok. I have installed the latest driver for the BlackGold. I notice from the logs that there are a huge number of Continuity Errors.
Any suggestions would be grately appreciated.
I attach some logs that might help.