Reply to thread

Message

Hi there,

Thats correct, the card / driver will accept the MODs:

20: DVB-S QPSK
31: DVB-S2 QPSK
32: DVB-S2 8PSK

and also:

23: 8VSB
29: 16APSK
30: 32APSK

For:

DVB-S2 QPSK = BDA_MOD_NBC_QPSK (31)
DVB-S2 8 PSK = BDA_MOD_NBC_8PSK (32)

it is indifferent whether it is a QPSK or 8PSK transponder, both will works, this will the card detect automatically.

The driver accepts also the MODs
-1: NOT_SET
0: NOT_DEFINED

With this both MODs the card will use the settings for each tuner from DD Control Center (Configuration Tool). Here you can set whether the card should works in DVB-S or DVB-S2 mode. For XP you must set in DD Control Center for all 8 Tuners the method DVB-S2 and use for scanning in MP for DVB-S2 modulated transponders the Setting "Not Set", for DVB-S/QPSK use the standard "QPSK" settings.

The problem for no founded channels during a scan is, that in the xml file are not all modulations are defined. But that was already clarified in previous posts.

Greetz CR

<blockquote data-quote="Cumpy Rules" data-source="post: 1120879" data-attributes="member: 55857">Hi there,Thats correct, the card / driver will accept the MODs:20: DVB-S QPSK31: DVB-S2 QPSK32: DVB-S2 8PSKand also:23: 8VSB29: 16APSK30: 32APSKFor:DVB-S2 QPSK = BDA_MOD_NBC_QPSK (31)DVB-S2 8 PSK = BDA_MOD_NBC_8PSK (32)it is indifferent whether it is a QPSK or 8PSK transponder, both will works, this will the card detect automatically.The driver accepts also the MODs -1: NOT_SET0: NOT_DEFINEDWith this both MODs the card will use the settings for each tuner from DD Control Center (Configuration Tool). Here you can set whether the card should works in DVB-S or DVB-S2 mode. For XP you must set in DD Control Center for all 8 Tuners the method DVB-S2 and use for scanning in MP for DVB-S2 modulated transponders the Setting &quot;Not Set&quot;, for DVB-S/QPSK use the standard &quot;QPSK&quot; settings.The problem for no founded channels during a scan is, that in the xml file are not all modulations are defined. But that was already clarified in previous posts.Greetz CR</blockquote>

[QUOTE="Cumpy Rules, post: 1120879, member: 55857"] Hi there, Thats correct, the card / driver will accept the MODs: 20: DVB-S QPSK 31: DVB-S2 QPSK 32: DVB-S2 8PSK and also: 23: 8VSB 29: 16APSK 30: 32APSK For: DVB-S2 QPSK = BDA_MOD_NBC_QPSK (31) DVB-S2 8 PSK = BDA_MOD_NBC_8PSK (32) it is indifferent whether it is a QPSK or 8PSK transponder, both will works, this will the card detect automatically. The driver accepts also the MODs -1: NOT_SET 0: NOT_DEFINED With this both MODs the card will use the settings for each tuner from DD Control Center (Configuration Tool). Here you can set whether the card should works in DVB-S or DVB-S2 mode. For XP you must set in DD Control Center for all 8 Tuners the method DVB-S2 and use for scanning in MP for DVB-S2 modulated transponders the Setting "Not Set", for DVB-S/QPSK use the standard "QPSK" settings. The problem for no founded channels during a scan is, that in the xml file are not all modulations are defined. But that was already clarified in previous posts. Greetz CR [/QUOTE]