Reply to thread

Message

Hi,

Over the weekend I've installed a Max S8 and an Irdeto SatCR LNB (DLU-32UL40-UNBOO-OPP) and I have the same issue with no channels found when scanning 0.8W. I've tried single transponders, full scan and to search for a transponder list but with no luck. I've also tried to modify the transponder file but it made no difference (this could of course be because I didn't do it correctly). I'v also tried adding channels directly but to no avail. Both DD-TV and DVBViewer works just fine and immediately find and tune channels. I really don't know what else to try.

In DD Control Center 'Ignore NIT in WMC' is disabled, all 8 tuners are set to DVB-S2 and each tuner is mapped to the 'same' channel number (tuner 1 - slot 1, 2-2, ...).

Attached are the modified transponder file and screenshots and logs from trying to scan 11261MHz in both DD-TV and MP. What I notice in the Tunerlog is that the signal seems to be consistently lower when MP is scanning and that the LNBSource is different.

//W

<blockquote data-quote="Wbunaarf" data-source="post: 1197793" data-attributes="member: 17027">Hi,Over the weekend I've installed a Max S8 and an Irdeto SatCR LNB (DLU-32UL40-UNBOO-OPP) and I have the same issue with no channels found when scanning 0.8W. I've tried single transponders, full scan and to search for a transponder list but with no luck. I've also tried to modify the transponder file but it made no difference (this could of course be because I didn't do it correctly). I'v also tried adding channels directly but to no avail. Both DD-TV and DVBViewer works just fine and immediately find and tune channels. I really don't know what else to try.In DD Control Center 'Ignore NIT in WMC' is disabled, all 8 tuners are set to DVB-S2 and each tuner is mapped to the 'same' channel number (tuner 1 - slot 1, 2-2, ...).Attached are the modified transponder file and screenshots and logs from trying to scan 11261MHz in both DD-TV and MP. What I notice in the Tunerlog is that the signal seems to be consistently lower when MP is scanning and that the LNBSource is different.//W</blockquote>

[QUOTE="Wbunaarf, post: 1197793, member: 17027"] Hi, Over the weekend I've installed a Max S8 and an Irdeto SatCR LNB (DLU-32UL40-UNBOO-OPP) and I have the same issue with no channels found when scanning 0.8W. I've tried single transponders, full scan and to search for a transponder list but with no luck. I've also tried to modify the transponder file but it made no difference (this could of course be because I didn't do it correctly). I'v also tried adding channels directly but to no avail. Both DD-TV and DVBViewer works just fine and immediately find and tune channels. I really don't know what else to try. In DD Control Center 'Ignore NIT in WMC' is disabled, all 8 tuners are set to DVB-S2 and each tuner is mapped to the 'same' channel number (tuner 1 - slot 1, 2-2, ...). Attached are the modified transponder file and screenshots and logs from trying to scan 11261MHz in both DD-TV and MP. What I notice in the Tunerlog is that the signal seems to be consistently lower when MP is scanning and that the LNBSource is different. //W [/QUOTE]