DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (1 Viewer)
- Thread starter morpheus_xx
- Start date
Germany
AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)
It is possible that you can sent me a PN too.
Because i have same problems.
It is possible that you can sent me a PN too.
Because i have same problems.
AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)
Hello,
I used MP 1.1.0.0 with Morpheus_xx patches successfully for quite a long time and was able to decode some Italien channels. Now I'm trying to use it with a different CAM and Smartcard in order to watch some german HD channels. Unfortunately MP always fails to show the descrambled channels. Using this CAM and Smartcard in a normal HD Receiver works without any problem!
Does anyone has a hint? It seems, that MP doesn't wait long enough for descrambling.
I have attached my logs.
Many thanks in advance
Frank
Hello,
I used MP 1.1.0.0 with Morpheus_xx patches successfully for quite a long time and was able to decode some Italien channels. Now I'm trying to use it with a different CAM and Smartcard in order to watch some german HD channels. Unfortunately MP always fails to show the descrambled channels. Using this CAM and Smartcard in a normal HD Receiver works without any problem!
Does anyone has a hint? It seems, that MP doesn't wait long enough for descrambling.
I have attached my logs.
Many thanks in advance
Frank
Hi Morpheus_xx,
After running MP 1.1.1. with the Digital Devices CineS2 (v5) with a direct attached CI for a while with succes (With only the problem of some timeshifting issue).
My mainboard crashed and I had to Install another mainboard.
My TV Server Spec at the moment:
Intel DP35DP Mainboard with latest Chipset drivers from Intel for Win7 x64 (IDT Audio Win Vista x64 Drivers)
6GB RAM
Digital Devices CineS2 With CI (Driver --> DigitalDevices-DVB-Driver-2.0.0.19-x64.msi)
MP 1.1.1. With Patch
TV-Server only Install
The improvement i see that the first time a channel is opend it is much faster with the new driver.
BUT!!!
The weird behaviour I have now is.
1) Changing Channel the current Timeshifting on the First Tuner keeps going and the second tuner is used but it can not be decrypted (Scrambled = Yes)
2) A restart is needed to Descramble Again (Changing back to previous channel won't work)
3) Opening the CI Menu gives a message that CI is not supported although It's decrypting the channel on first use
4) When I stop Live TV first and then change channel sometimes works too.
FTA Channels work al the time.
The new drivers also have support for the new DVB-C/T cards from DD, I'll guess they maybe changed things In the CI
Tonight I will do another test and post logs!
Morpheus do you want me to supply you with separate logs for each test case?
1) First use Live TV
2) Changing channel while playing live tv
3) Changing channel by first stopping current live tv
Greetz Jarroz
After running MP 1.1.1. with the Digital Devices CineS2 (v5) with a direct attached CI for a while with succes (With only the problem of some timeshifting issue).
My mainboard crashed and I had to Install another mainboard.
My TV Server Spec at the moment:
Intel DP35DP Mainboard with latest Chipset drivers from Intel for Win7 x64 (IDT Audio Win Vista x64 Drivers)
6GB RAM
Digital Devices CineS2 With CI (Driver --> DigitalDevices-DVB-Driver-2.0.0.19-x64.msi)
MP 1.1.1. With Patch
TV-Server only Install
The improvement i see that the first time a channel is opend it is much faster with the new driver.
BUT!!!
The weird behaviour I have now is.
1) Changing Channel the current Timeshifting on the First Tuner keeps going and the second tuner is used but it can not be decrypted (Scrambled = Yes)
2) A restart is needed to Descramble Again (Changing back to previous channel won't work)
3) Opening the CI Menu gives a message that CI is not supported although It's decrypting the channel on first use
4) When I stop Live TV first and then change channel sometimes works too.
FTA Channels work al the time.
The new drivers also have support for the new DVB-C/T cards from DD, I'll guess they maybe changed things In the CI
Tonight I will do another test and post logs!
Morpheus do you want me to supply you with separate logs for each test case?
1) First use Live TV
2) Changing channel while playing live tv
3) Changing channel by first stopping current live tv
Greetz Jarroz
- Moderator
- #146
AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)
Hi
I can confirm this issues and i have test this with many Options but it has done nothing for best.
I think Morpheus_XX must speak with DD and changed small thingsfor better support.
Hi
I can confirm this issues and i have test this with many Options but it has done nothing for best.
I think Morpheus_XX must speak with DD and changed small thingsfor better support.
Hi Dlarge,
When you revert back to .57 driver version will things work again?
This morning i read on the MCE Communicty website that they can change all kind of settings related to the CI/CAM PMT with the new driver.
Did you use them too?
IU kopied this from the MCE Community website
Einstellungen:
CA-Systeme
INGLE oder MULTI ?
CA-AnmeldungYNAMIC oder STATIC ?
Erzwinge lesen originale PMT:AUTO oder ?
CA-PMT Löschzeit:0sek oder ?
CI-Fehlerüberwachung:1500ms oder ?
dbox Kompatibilität:AUS
regards,
Jarroz
When you revert back to .57 driver version will things work again?
This morning i read on the MCE Communicty website that they can change all kind of settings related to the CI/CAM PMT with the new driver.
Did you use them too?
IU kopied this from the MCE Community website
Einstellungen:
CA-Systeme
INGLE oder MULTI ?CA-Anmeldung
YNAMIC oder STATIC ?Erzwinge lesen originale PMT:AUTO oder ?
CA-PMT Löschzeit:0sek oder ?
CI-Fehlerüberwachung:1500ms oder ?
dbox Kompatibilität:AUS
regards,
Jarroz
- Moderator
- #148
AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)
No, I have test this with all Drivers after the 1.3.4.34 but overall the same issues.
My Settings in Cam are
CA-Systeme: Multi
CA-Anmeldung: Dynamic
Erzwinge lesen originale PMT: Auto
CA-PMT Löschzeit: 0sek.
CI-Fehlerüberwachung: 1500ms
dbox Kompatibilität: Ein
I canot open the CI menu in Mepo 1.20 i become a Dialog with "Card is not suportet or not ready....."
No, I have test this with all Drivers after the 1.3.4.34 but overall the same issues.
My Settings in Cam are
CA-Systeme: Multi
CA-Anmeldung: Dynamic
Erzwinge lesen originale PMT: Auto
CA-PMT Löschzeit: 0sek.
CI-Fehlerüberwachung: 1500ms
dbox Kompatibilität: Ein
I canot open the CI menu in Mepo 1.20 i become a Dialog with "Card is not suportet or not ready....."
I did not have the CI problem with previous version (e.g. .57 version), do I understand t correctly that you have this problem now with all driver versions.
Where do you change your Cam settings, I don't have the option to change the CAM settings with my AstonCrypt using the config tool from DD.
Where do you change your Cam settings, I don't have the option to change the CAM settings with my AstonCrypt using the config tool from DD.