DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (2 Viewers)

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

thanks morpheus,
but with this library, MP cant handle the card, no channel when scanning, an no ci-menue, its the same with 1... and 2.. drivers!

very strange, I didn't change other parts than detecting the CI filter in graph.

this makes me wondering, graph build stalled for nearly 40 seconds, before the CI connection failed:

2010-11-21 09:38:24.388054 [(9)]: dvb:  Digital Devices Common Interface 1 detected
2010-11-21 09:38:24.388054 [(9)]: dvb:  Render [Capture]->[Digital Devices Common Interface 1]
2010-11-21 09:38:31.357137 [(15)]: Controller: epg stop
...
2010-11-21 09:38:46.374288 [PowerScheduler poll thread(14)]: PowerScheduler: System changed from busy state to idle state
2010-11-21 09:39:03.507482 [(9)]: dvb:  Render [Capture]->[Digital Devices Common Interface 1] failed

in my test I've seen this some times after re-configuring the tuner / CI configuration, but after a reboot it worked. have you checked the behaviour after PC restart?

 

[hofi]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

i did a reboot, and i tested now once more but with its the same.
mayby, in your first post you wrote the the library is from the last svn, and i use 1.2.0 alpha.
sorry but i have no idea how to install the actual svn's!

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

new build based on official 1.2 alpha. please test again!

 

[hofi]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

unscrambled channel and channel-scanning okay now, but CI-Menue and scrambled channels broken, also after reboot.

 

[PlasmaGucker]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hello
I have the same Problem as hofi. Ci Menue doesnt work for me even with the nex tv.lib.
Is it a prob of WHS? or is it under W7 the same?
Thanks for your work morpheus!

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Does decoding work? If I look at these lines, the CI Filter is not even attached inside graph

2010-11-21 20:19:23.898564 [TVService(6)]: dvb:  Render [Capture]->[Digital Devices Common Interface 1]
2010-11-21 20:19:53.616617 [TVService(6)]: dvb: [B][COLOR="Red"] Render [Capture]->[Digital Devices Common Interface 1] failed[/COLOR][/B]

 

[hofi]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

morpheus, here logs from my last tests.

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Please test this new tvlibrary! It should now work again with newer drivers and CI support (incl. CI menu).

Remember:
after changing DD drivers, use their configuration tool to assign CI filter to the tuner you want them to use! Otherwise graph building can't use the CI!

 

[hase23]

Hello Morpheus,

TVLibrary the work so far with the driver of Digital Devices 2.0.0.19 best SKY is decoded without problems without skip-until now.

MEPO 1.2 Alpha, Digital Devices DVB-S2, ASUS Deluxe atom, 4GB DDR Ram.

Thank you

 

[jarroz]

Hello Morpheus,

Unfortunatly I don't have the time now the test but this weekend I will and I'm eager to test...

Already a big thanks

Regards,
Jarroz