DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (3 Viewers)

[Darkroom]

AW: Re: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi Morpheus,

thanxx for great work!!!
I installed RC4 on a fresh Win7/32.
I make a short test with scrambled channels and everythink looks fine.
I use Digital Devices driver .34 with my 2 cards (1- version 5.5 and 1 older Version 4.5?)
Channel scan work - Live TV an additional manual Timeshift (both scrambled) works.
Cam-Menu not work (for the first test)
I did some more testing now - In the channelscan are some channels missing (I´m not sure it´s RC4 or something else)
when i manually tune for the channels they work.
After I start Mediaportal the Tv needs 5-10 sec till the movie isn´t stuttering (not a scrambled channel) then everything is O.K. incl.
when I change the channel it´s 1-2 sec (no matter decrypted or not) - so it´s not a big deal.
on the weekend i hope to have more time for testing.

 

[dirki1972]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

yeah i have done

i installed my OS new and MP , too.
and what should i say..... surprise ..... it woks
channelscan, descrambling all woks except the CAM menu, but this is not so important in the moment.

special to morpheus great work.


regards
dirk

 

[Darkroom]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

So i have done some more testing
Live TV works good
Scheduled recording is O.K.
But when I look live TV go back into the TV Menu and press record now - the recording does not start.
When I take a look into the TV-Servers Manual control I see only timeshifting active And the rec button in the left corner of MePo isn´t there.
When I stop Live TV The recording starts - It´s a little bit weird...?

I hope the logs help - I don´t know it´s from RC4 (i only test it with this Tuner-Update) or from this Tuner-Update

 

[fkremser]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi Morpheus_XX

today I was able to install my DD CI with an VIAccess CAM.
I'm using the latest DD driver and MP RC4 with your latest TVServer patch.

The first test worked perfect!!!

Switching between scrambled and unscrambled or between two scambled
channels is working very well and fast (!!!).
Also CAM menu is working!

Recording has to be tested!

Only starting TV with a scambled channel is not working - starting TV with an unscrambled channel and then switching to a scrambled channel is working without problems. I will check again tomorrow and will provide a log!

Many, many thanks to you, morpheus_xx!!!! Great work!!!


card Digital Devices v5.4; driver v:.1.4.3.44; graph build: ok; channel scan: ok; TimeShift: ok

 

[HTPC_2010]

Hallo!

Meine Tests mit der Mystique SaTiX-S2 V2 CI Dual
Mystique SaTiX-S2 V2 CI Dual

mit dem CI Modul (Das CI ohne Bridge)
MystiqueTV

Getestet mit der aktuellen SVN RC4 des TV-Servers:

Sobald ich das CI im Mystique Treiber aktiviere bekommt MP kein Signal mehr bei der Sendersuche!

Ohne dem CI geht alels bestens!

Vergleichbare Tests mit WMC oder des DVB-Viewer gehen tadellos!

Im Anhang meine Logs!

 

[dlarge500]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

2010-06-05 20:57:10.792308 [(6)]: Exception :TvLibrary.TvExceptionGraphBuildingFailed: Graph building failed ---> TvLibrary.TvException: No Tv Receiver filter found
bei TvLibrary.Implementations.DVB.TvCardDvbBase.AddAndConnectBDABoardFilters(DsDevice device)
bei TvLibrary.Implementations.DVB.TvCardDVBS.BuildGraph()
--- Ende der internen Ausnahmestapelüberwachung ---
bei TvLibrary.Implementations.DVB.TvCardDVBS.BuildGraph()
bei TvLibrary.Implementations.DVB.TvCardDVBS.Tune(Int32 subChannelId, IChannel channel)

diese logs hatte ich auch wenn ich nicht die version von Morpheus_XX drauf hatte, hast du denn mal eine komplette Neuinstallation von MePo gemacht und die RC4 drauf und dann die TVSErver version von Morpheus_XX drüber als upgrade?

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

@all: I attached a new build in 1st post !

Now I support the Mystique cards I also removed some test code, which shouldn't be needed.

So please test this build, if tuning / descrambling at least works as in the previous build

 

[HTPC_2010]

morpheus_xx:

perfekt geht alles!

schaue nun auch verschlüsselt

brauchst du zum check noch die loggs?

Mfg Andreas

 

[dlarge500]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

ich denke das es besser ist mal 1-2 tage zu testen und dann die Logs mal zu posten das Morpheus_XX die in ruhe durchschauen kann.

 

[dyamant]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Falls es für diese Artikel interessant ist. Leider lässt sich mit dieser Version die MD Api Schnittstelle nicht nutzen. Unable to start graph !
Schade, habe eigentlich durch diesen workaround auf eine stabilere Version für die DD Karte gehofft.
Falls jemand logs benötigt. Immer sagen.