DTS-Sound funktioniert nicht.. (2 Viewers)

Kickaha

MP Donator
  • Premium Supporter
  • June 17, 2009
    23
    1
    NRW
    Home Country
    Germany Germany
    Hallo zusammen,
    nach längerer Zeit und ein oder zwei Neuinstallationen von MP1 auf meinem HTPC wollte ich mal wieder einen Film schauen. Leider kam da kein Ton. Die Tonspur ist DTS. Videos mit anderen Audiocodes wie MPEC ACC geben den Ton einwandfrei wieder. Seltsamerweise tritt das Problem nur in MP auf, VLC z.B. gibt DTS aus.
    Ich habe in den Einstellungen schon alles durchprobiert, nix hilft. Bin mir ziemlich sicher, das ich früher keine Tonprobleme hatt..
    Nutze Version 1.38.3/x64/Tatiana&Leo. LAV 0.81.0
    Irgendjemand eine Idee? vielleicht ne alte Version von LAV nutzen? Allerdings tritt das Problem auch bei den MS-Codes auf..

    Sonntägliche Grüße!

    EDIT: HTPC läuft auf Windows 11. Kein Receiver. TV ist direkt per HDMI angeschlossen.
     
    Last edited:

    CyberSimian

    Test Group
  • Team MediaPortal
  • June 10, 2013
    3,611
    2,639
    Southampton
    Home Country
    United Kingdom United Kingdom
    In response to the question: Can Windows 10 play a DTS movie soundtrack, Google says this:

    3. Bitstreaming (Passthrough) to a Receiver
    If you have a home theater receiver connected via HDMI, you can set Windows 10 to "bitstream" the audio, allowing your receiver to handle the decoding.
    • Go to Sound Settings > Speaker Properties > Supported Formats to ensure DTS is checked.
    • In your media player (e.g., VLC or Plex), set the audio output to "HDMI" and enable passthrough.
    The laptop from which I am posting does not have these settings, so I cannot confirm that they actually exist.

    -- from CyberSimian in the UK
     

    emphatic

    Design Group
  • Team MediaPortal
  • August 25, 2006
    3,758
    1,250
    Alingsås
    Home Country
    Sweden Sweden
    Guten tag.

    Make sure these boxes aren't checked in your audio settings (LAV) and try again:

    Namnlös.png
     

    Kickaha

    MP Donator
  • Premium Supporter
  • June 17, 2009
    23
    1
    NRW
    Home Country
    Germany Germany
    @CyberSimian
    Thanks for your Posting. The TV is connected directly to the HTPC (HDMI) the driver didn't list DTS. The driver for the realtekchip supports DTS, but this is the digital output, theoretically i could contect a TOS-Link-Cable, but only for worst case..
    Google told me, for Problems with Windows 11 and DTS to install "DTS sound outbound".. but i am not sure, this would fix my problems..
     

    Kickaha

    MP Donator
  • Premium Supporter
  • June 17, 2009
    23
    1
    NRW
    Home Country
    Germany Germany
    @empathic
    Thanks! it works! I unchecked Both DTS-boxes, first no result, but after a reboot the sound was there :) Wonderfull!
     

    Users who are viewing this thread

    Top Bottom