Tools and other software DVB-IP vs ATSC for Ceton Tuners (1 Viewer)

[WiseguyMN]

I have activated a Comcast cable card in my Ceton InifiTV 6 ETH device, But for some reason in Media Portal 2 ... I see DVB-IP tuners and was expecting ATSC tuners (I am located in USA) ... cannot see any channels. I am thinking that maybe Ceton shipped me the wrong device? I have an issue opened with Ceton support but they take 5+ days to respond sometimes.

If I got the wrong device I want to ensure I can return within the return policy # of days where I purchased the device.

Thanks
Scott[DOUBLEPOST=1457653449][/DOUBLEPOST]Screenshot attached

 

[breese]

ATSC is Over the Air Antenna TV

What you are looking for is this
http://wiki.team-mediaportal.com/1_...ver_Configuration/02_TV_Servers/6_Scan_DVB-IP

 

[WiseguyMN]

What IP do I use --- the ceton device or something that comcast provides?? Documentation does not specify this.
Ceton has stated they will not provide any help or support so I am on my own and this product seems like you need to be a developer to get running and maintain.

I can conenct to the ceton device and get info, but have no idea what URL details to use for scanning channels
http://[DeviceIP]/Services/System.html <-- works

http://[DeviceIP]/Services/Channels.html <-- no good

http://[DeviceIP]/Channels.html <-- no good

 

[WiseguyMN]

Found a section in the ceton device page on a tuner set to a channel .... looks like the device uses RTP for streaming.

So based onthat I assume "source server" is teh ceton device and local server is my mediaportal server.

[DOUBLEPOST=1457744513][/DOUBLEPOST]Tried the following with no luck (no signal message). the 101 adderss is the ceton device and the other my HTPC.
#EXTM3U
rtp://192.168.1.101
rtp://192.168.1.101:8000
rtp://@192.168.1.101:8000
rtp://192.168.1.101@192.168.223.129
rtp://192.168.1.101:8000@192.168.223.129[DOUBLEPOST=1457744913][/DOUBLEPOST]Also tried UDP with no luck

udp://192.168.1.101
udp://192.168.1.101:8000
udp://@192.168.1.101:8000
udp://192.168.1.101@192.168.223.129
udp://192.168.1.101:8000@192.168.223.129

I have no doubt it will work once I figure out the right protocol and syntax/format for the ceton infinitv eth 6 device.